Our client is looking for several qualified Forklift Operators. These are Temporary-To-Hire positions and located in Ames, Iowa.

Starting Pay: $23.00 / Hour

Hours: 7:00am-7:00pm (rotating Schedule)(30 minutes unpaid break & 3X15 min paid breaks)Week 1: Monday, Tuesday, Friday & Saturday, Week 2: Sunday, Wednesday & Thursday

Duties:

1. Operating a stand up, battery powered Forklift (95% of work shift).
2. Utilizing a had held scanner to locate products.
3. Taking finished products to the warehouse and putting on racking system.
4. Taking products form the warehouse and loading them into a semi-trailer.

Requirements:

1. Must live within 15-20 minutes of Ames
2. Minimum 6 months stand up forklift experience.
3. Ability to work in a fast-paced work environment, safely.
4. NO smoking on the premises (Not in your car or on-site, you may leave during your 30-minute break, but NOT the 15-minute breaks).

Click "Apply Now" to complete an application.

Job Requirements:

Stand up Forklift

General Warehouse, Kitting & Forklift

Our client is looking for an individual to work in their Shipping & Receiving and packaging department. This is a small facility located on the ne side of Des Moines. Opportunity for F/T employment with benefits.

Hours: 8:00 am - 4:30 pm (Monday-Friday)

Starting Pay: $18.50/hour. 

Duties:

1. Picking, counting & packing parts 75-80% of your day.
2. Operate sit down and/or stand-up forklift to move products (Load & unload trucks with forklift, 20% of your day).
3. Cleaning up, tearing down reels, pallets, boxes, etc. 
4. Cutting cable to length.Work with UPS & Fed Ex shipping and receiving.
5. Record raw materials coming in and finished products leaving the facility.
6. Manual picking, pulling and packing shipments. 
7. Pull raw materials and finished products from production line and racking system.

Requirements:

1. Ability to read a tape measurer to 1/8 of an inch.
2. Sit down Forklift Experience (min 6 months, previously certified).
3. Stand up forklift exp. a plus.
4. Ability to lift, push, pull up to 50 pounds.
5. Ability to pay attention to detail.Ability to count accurately from 1-100.
6. Ability to work with basic hand tool

 Click Apply Now to complete an application today!

Job Requirements:

Kitting, General warehouse, forklift

Welder - Mig

Work half day on Fridays! We have immediate temp-to-hire opening. This position is a welding position making cold storage systems such as deli, floral, and wine cases.

Pay $20.00+ /Hour (DOE)

Hours: Monday-Thursday, 6:00am-4:00pm. Friday 8:00am-Non (Leave at Noon on Fridays if you have 40 hours in or stay for Over Time!)

Duties:

1. Basic knowledge of MIG welding.
2. Measure, cut and assemble sheet metal products.
3. Operate a band saw.Work with basic hand tools; hammer, screw drivers & tape measure. 
4. Working in a team environment to assemble products.
5. Ability to trouble shoot and resolve problems.
6. Ability to read or learn to read blue prints and schematics.

Job Requirements:

1. Ability to lift, push, pull 30+ pounds on a constant basis.
2. Ability to push, pull & lift up to 50 pounds on an occasional basis.
3. Ability to measure correctly to an 8th of an inch and make precision cuts.
4. Previous construction or building experience (framing, rough or finish carpentry) is strongly preferred.
5. Must have reliable transportation and steel toed boots.

Click "Apply Now" to complete an application

Job Requirements:

Mig Welder

General Laborer / Event set-up

Our client is looking for a group of individuals whom can set up for events. 

Starting Pay $20.00 / hour

Hours:8-3-26

Monday 8:00am (8 people)8-4-26

Tuesday 8:00am (2 People)8-5-26

Wednesday 3:30pm (7 People)

Duties:

1. Assist setting tables up, putting table clothes on the table.
2. Putting curtains on the railings ( 2 ½ foot and 6 ft) no ladders (step stool).
3. Rolling out carpets in isles.
4. Unloading equipment from trucks and setting up venues for events, including chairs and building stages.
5. Putting 2 chairs with each booth.

Requirements:

1. Ability to work a full 8 hours shift.
2. Ability to push, pull and lift 20-25 pounds consistently and 45-50 pounds occasionally.

Dress Code: Tennis shoes and solid color jeans/shorts.

Click "Apply Now" to complete an application.

Job Requirements:

General Laborer

Forklift / Order Selector - Ames Iowa

Our client is looking for a qualified Forklift Operator. This is a Temporary-To-Hire position and located in Ames, Iowa.

Starting Pay: $22.00 / Hour

Hours: 3:00pm - 11:00/11:30pm (Monday-Friday)

Duties:

1. Operating Stand up, battery powered Forklift or a sit-down propane forklift (80% of work shift).
2. Utilizing a had held scanner to locate products.
3. Unloading semi-trailer with finished products to the warehouse and putting on racking system.
4. Taking products form the warehouse and loading them into a semi-trailer.Bring supplies to the packaging line.Building pallets.

Requirements:

1. Minimum 6monhts stand up (electric) or sit-down (propane) forklift.
2. Ability to work in a fast-paced work environment, safely.
3. Ability to lift up to 50 pounds through out the shift.

Click “Apply Now” to complete an application for this position.

Job Requirements:

Sit down forklift experience

General Laborer

Our client is looking for a general laborer to work on the shop floor. This is a very physical, dusty and high attention to detail position. Located on the se side of Des Moines.

Starting Pay: $20.00 - $22.00/Hour

Hours: 6:00am-4:30pm (Finish) (Monday-Friday, frequent Saturdays)One hour lunch

Duties:

1. Complete tasks related to panel production
2. Clean and maintains production bed (concrete).
3. Install rebar and strand.Pour and finishes concrete.
4. Strip out panels after completion.
5. Patch and repair panels as needed.
6. Maintain and improve housekeeping to ensure a safe and productive workplace on an hour by hour, day by day basis.
7. Complete daily preventive maintenance tasks as assigned, including tool maintenance.
8. Responsible for tools and machinery in your area.
9. Notify appropriate personnel of issues requiring maintenance work orders to be issued.

Requirements:

1. MUST be able to read a tape measure!
2. Looking for individuals with previous construction, framing or concrete experience.
3. Ability to lift 50+ pounds.
4. Steel toed work boot with metatarsal top.
5. Ability to step, climb stairs, reach, stoop, push, pull, squat.
6. Adhere to all safety rules and guidelines.
7. Identify, understand, & report safety hazards, poor behavior and unsafe actions immediately.

Click "Apply Now" to complete the application.

Job Requirements:

Construction

Warehouse Order Puller

Our client is looking fro several Order selectors for a distribution facility.  

Pay: $19.30 per hour

Hours: 3:00pm-11:30pm (Sunday - Thursday. Opportunity for overtime during peak seasons.

Dress Code: MUST wear steel toed shoes, otherwise shorts are acceptable and a work t-shirt is provided

Job Responsibilities: 

1. Maintaining a pick rate standard of 160 picks per hour while achieving 99.9% accuracy. 
2. Use mini “handheld” computer that measures 2X2 that includes the orders in which you will be pulling/preparing Shrink wrapping palatalized orders to prevent breakage.
3. Counting pulled orders to ensure accuracy. 
4. Loading customer’s liquor orders onto delivery trucks or will call customer vehicles.
5. Restocking warehouse pulling locations by use of mechanized equipment or by hand.
6. Maintain a clean and organized warehouse/workspace.
7. Placing all materials for recycling in appropriate bins or compactors.Perform routine cleaning responsibilities including but not limited to sweeping or mopping floors, cleaning break areas.

Job Requirements: 

1. Steel toed boot required.Must be able to lift 50 pounds on a constant basis.
2. Must have previous forklift/ mechanized double pallet jack experience.
3. Must be able to work in a fast paced environment with a HIGH attention to detail.
4. Must be able to read, write, speak and understand English.
5. Must be able to count from 0-100 and have basic multiplication skills. 

Click “Apply Now” to complete an application.

Job Requirements:

Electric Pallet Jack / Order Selector

Shipping/Logistics Clerk-

Our client is looking for a Logistics Clerk.  This position is located on the NE side of Des Moines.

Starting Pay: $18.75  / hour

Hours: 9:00am/10:00-6:30/7:30pm (Monday-Friday, Occasional Saturdays and OT)

Duties:

1. Processes and troubleshoot customer orders.Resolve order discrepancies as needed.
2. Coordinate and update warehouse employees regarding new and modified orders.
3. Review shipping and receiving reports to ensure accurate and on-time deliveries.
4. Processes, audits and files various documentation.

Requirements:

1. 1+ year of experience working in a customer service role within a logistics or distribution environment.
2. Strong knowledge with BOLs.
3. Strong customer service skills and attitude.
4. Strong attention to detail and organizational skills.
5. Basic computer skills.
6. Basic math skills.

Click "Apply Now to complete an application.

Job Requirements:

Shipping / Customer Service Clerk-

Entry Level Manufacturing Associate

No experience? No problem! Our manufacturing client in Des Moines is looking for entry level wire assemblers. This position is a long-term, temp-to-hire job with extensive opportunities for growth.

Starting Pay: $18.26 / Hour (+ raises every 6 months)

Hours: 7:30am-4:00pm (+ optional OT upon hire-on)

Duties:

1. Read and interpret shop drawings.
2. Cut and crimp wires using hand tools.- Connect wires by following alphanumeric labels and color codes.                
3. Perform quality control on completed products.Skills for Success.
4. Strong attention to detail.- Ability to sit or stand for an 8 hour shift.
5. Ability to perform repetitive wrist motions for an 8 hour shift.
6. Previous wiring or assembly experience helpful, but not required.

Key Qualifications:

1. Proven job stability (1-3 years per job; no more than 3 jobs in the last 5 years).
2. Ability to interpret blue prints and schematics.
3. Strong desire to learn and grow.
4. Ability to work independently and ask questions when needed.
5. Successful completion of attention to detail test.

Click "Apply Now" to complete an application or to submit a resume.

Job Requirements:

Work with Hand Tools & measurements.