Update your address for your W2 before 12/31/17! Click here to read more.

close

Branch No: 67962-6317
1305 Memorial Drive
Watertown, WI 53098
Phone: (920) 245-6103

Available Positions

37 positions available.

Roll Tender

Hartland WI

Base Pay: 13.00

Roll Tender (Press Department) Thursday-Saturday E/O Sunday 7:00am-7:00pm Assist in the operation of the litho Presses (make ready, perforati...

Roll Tender (Press Department)

Thursday-Saturday E/O Sunday 7:00am-7:00pm

  • Assist in the operation of the litho Presses (make ready, perforation cuts, mounting of plates , paper change etc.)
  • Ensure paper meets job specifications and paper splices are prepared ad adequate for continual press operations.
  • Visually Inspects the press impressions by checking quality the meets job specifications and quality the meets job specifications and quality requirements per client.
  • Performs Preventative Maintenance task (lubricating the press cleaning the presses, replacing filters, cleaning ink rollers, dampeners and the blankets and inspecting and replacing water filters, pressure rollers , image cylinder) regularly to keep the equipment in good working condition.
  • Properly and accurately reports paper usage by recording the date, job, correct roll number, original weight and actual weight used. Preferred Knowledge 

Skills and Abilities: Knowledge of terminology, job flow, job tickets, and comply with the quality standards for the press area.

Basic Math Skills Strong Mechanical Aptitude and mechanical trouble shooting skills.

Education: High School Diploma or equivalent required

Apply Now More Info

Folder - Cutter Operator

Hartland WI

Base Pay: 12.00

Folder/Cutter Operator • Shift:  4 Days Per Week & Every Other Weekend – 1st Shift (7:00AM-3:00PM) • Description: o Set up...

Folder/Cutter Operator

• Shift:  4 Days Per Week & Every Other Weekend – 1st Shift (7:00AM-3:00PM)

• Description:

o Set up and operate cutting/folding equipment

o Review specifications, schedule and make adjustments to ensure proper equipment set up

o Visually inspect printed products prior to, during and after run time to ensure products meet quality standards

o Perform preventative maintenance tasks on equipment

o Provide direction to temporary helpers

o Maintain a clean and safe work environment

o Clean and adjust rollers

• Qualifications:

o Exceptional Attention to detail

o Ability to read and understand job tickets

o Basic Math skills

o Willing to work overtime as determined by production needs

o Previous Bindery/Finishing Department experience preferred

o High school diploma or equivalent required

• Pay: Starting at $12.00 (depending on experience)

Apply Now More Info

Shipping Clerk

Hartland WI

Base Pay: 13.00

Shipping Clerk/Material Handler • Shift: Saturday & Sunday 6:00PM-6:00AM • Description: o Verify documentation and track jobs using j...

Shipping Clerk/Material Handler

• Shift: Saturday & Sunday 6:00PM-6:00AM

• Description:

o Verify documentation and track jobs using job tickets, equipment schedules and system reports to ensure all shipments are accurate and complete

o Verify quantities produced and ensure all product is accounted for

o Complete bills of lading, sort, wrap, and label skis and/or cartons with information from job ticket o Ensure leads and supervisors receive proper communication of shipping information

o Verify weights of completed jobs

o Load and unload trucks

o Operate forklift and clamp trucks

• Qualifications:

o Willing to work overtime as determined by production needs

o Willingness to learn and able to follow detailed instructions

o Great communication skills o Exceptional attention to detail o Ability to read and understand job tickets

o High school diploma or equivalent required

• Pay: Starting at $13.00 (depending on experience)

Apply Now More Info

Pressman

Hartland WI

Base Pay: 16.00

Remedy Intelligent Staffing has immediate openings for Pressmen in Hartland, WI. Pay:  $16 Shifts:Monday-Wednesday & Every Other Sunday 7:...

Remedy Intelligent Staffing has immediate openings for Pressmen in Hartland, WI.

Pay:  $16

Shifts:Monday-Wednesday & Every Other Sunday 7:00AM-7:00PM or Thursday-Saturday & Every Other Sunday 7:00AM-7:00PM

Description:

o Ensure continuous effective operations while following/supporting the policies, goals and objectives of the department

o Prepare and operate heatset offset web presses, mount plates, change paper, change color, examine job orders to determine quantity, specifications, colors, etc. o Visually inspect press impressions and preform preventative maintenance tasks on the press(es)

Qualifications:

o Exceptional attention to detail

o Previous press experience required

o Mechanically inclined 

Apply Now More Info

Machine Operator/Assembly

Nashotah WI

Base Pay: 11.75

3rd shift Machine Operators needed in Nashotah, WI. Pay:  $11.75 Hours: 10:45 p.m. to 6:15 a.m.  Job Duties: - Operate machines or assemb...

3rd shift Machine Operators needed in Nashotah, WI.

Pay:  $11.75

Hours: 10:45 p.m. to 6:15 a.m. 

Job Duties:

- Operate machines or assembly equipment to make parts/products

- Read work orders, formulas, or processing charts

- Maintain documentation

- Position and secure pieces in machines

- Remove finished products from machines using appropriate tools

- Measure and visually inspect products

- File, debur, sand, grind, or polish products

- Final packaging of products for shipments

- Responsible for clean up procedures

- Training new employees on proper procedures and techniques - other duties as assigned

Apply Now More Info

Machine Operator/Assembly

Nashotah WI

Base Pay: 11.75

3rd shift Machine Operators needed in Nashotah, Wi. Pay:  $11.75 Hours: 11:45 p.m. to 7:15 a.m.  Job Duties: - Operate machines or assemb...

3rd shift Machine Operators needed in Nashotah, Wi.

Pay:  $11.75

Hours: 11:45 p.m. to 7:15 a.m. 

Job Duties:

- Operate machines or assembly equipment to make parts/products

- Read work orders, formulas, or processing charts

- Maintain documentation

- Position and secure pieces in machines

- Remove finished products from machines using appropriate tools

- Measure and visually inspect products

- File, debur, sand, grind, or polish products

- Final packaging of products for shipments

- Responsible for clean up procedures

- Training new employees on proper procedures and techniques - other duties as assigned

Apply Now More Info

Layout Inspector

Watertown WI

Base Pay: 20.30

Remedy Intelligent Staffing has immediate 2nd shift opening in Watertown, WI for a layout inspector! Pay:  $16+ BOE Hours:  2nd shif...

Remedy Intelligent Staffing has immediate 2nd shift opening in Watertown, WI for a layout inspector!

Pay:  $16+ BOE

Hours:  2nd shift 1 p.m. to 8 p.m. 

GENERAL RESPONSIBILITIES: Provide support to all manufacturing areas necessary to maintain acceptable levels of operating quality. Provide guidance / instruction to operations personnel regarding methods for assessing and maintaining conformance to product quality standards.

ESSENTIAL FUNCTIONS:

1. Perform layout, programming and inspection on a diversified line of parts for receiving inspection, manufacturing, assembly & test, engineering procedures and first article inspection plans using all types of inspection technology including CMM’s.

2. Provide instruction, guidance and technical advice to production operators as needed.

3. Problem-solve and troubleshoot, utilizing technical knowledge and expertise. Notify Quality Manager and Production Supervisor or Lead of problem production areas.

4. Perform electrical/electronic inspection and testing of components, units, sub-assemblies and assemblies utilizing pre-determined methods and techniques and standardized test sets to energize and check performance and operating quality standards.

5. The performance of physical inspections, process capability studies, gauge capability studies, and/or implementation of statistical process control plans.

QUALIFICATIONS:

1. To perform this job successfully, you must be able to perform each essential function satisfactorily. Reasonable accommodation may be made to enable individuals, with disabilities, to perform the essential functions.

2. Education, training and experience equivalent to a high school diploma with relevant experience in a manufacturing environment.

3. Ability to work within established health, safety and quality guidelines and to organize the workload and meet deadlines.

4. Ability to read, analyze and interpret procedures and business and technical documents such as blueprints and job layouts. Must possess effective writing skills to complete related reports, forms and documents.

5. Ability to effectively utilize PC (Word & Excel) to collect

Apply Now More Info

CNC Brake Press & Setup Operate

Watertown WI

Base Pay: 18.94

CNC Brake Press Setup & Operate Location: Watertown, WI 2nd shift : 2:30 p.m. to 10:30 p.m.  Monday - Friday Pay :  $16+ BO...

CNC Brake Press Setup & Operate

Location: Watertown, WI

2nd shift : 2:30 p.m. to 10:30 p.m.  Monday - Friday

Pay :  $16+ BOE

Overview:

  • Perform a variety of CNC Fabrication center functions that include:
  • Setup, programming, and adjustment of related equipment, compilation of setup documentation, input of data for setups and necessary report distribution.
  • All operations are in accordance with established specifications, schedules and budgets to achieve maximum standards of quality and customer service, in alignment with divisional objectives.
  • Will answer related inquiries to various levels of the organization. 

Apply Now More Info

CNC Turret Set-Up & Operate

Watertown WI

Base Pay: 18.94

CNC Turret Set up & Operator  2nd shift:  2:30 p.m. to 11:00 p.m.   Monday - Thursday  Pay is BOE :  $15.00 to $1...

CNC Turret Set up & Operator 

2nd shift:  2:30 p.m. to 11:00 p.m.   Monday - Thursday 

Pay is BOE :  $15.00 to $18.94

Perform a variety of CNC Fabrication center functions that include: Setup, programming, and adjustment of related equipment, compilation of setup documentation, input of data for setups and necessary report distribution.

All operations are in accordance with established specifications, schedules and budgets to achieve maximum standards of quality and customer service, in alignment with divisional objectives. Will answer related inquiries to various levels of the organization. 

Will answer related inquiries to various levels of the organization. This position will not supervise a staff but will be responsible for the training of junior level employees. Guidance will be provided on possible sources of information and methods to complete tasks, as well as specific instructions on new work and any variations. Able to meet deadlines and exercise judgement regarding related items

Apply Now More Info

CNC Brake Press Setup & Operate

Watertown WI

Base Pay: 18.94

CNC Brake Press Setup & Operate Location: Watertown, WI 3rd shift : 10:30 p.m. to 6:30 a.m.  Monday - Friday Pay :  $16+ BOE Overview...

CNC Brake Press Setup & Operate

Location: Watertown, WI

3rd shift : 10:30 p.m. to 6:30 a.m.  Monday - Friday

Pay :  $16+ BOE

Overview:

  • Perform a variety of CNC Fabrication center functions that include:
  • Setup, programming, and adjustment of related equipment, compilation of setup documentation, input of data for setups and necessary report distribution.
  • All operations are in accordance with established specifications, schedules and budgets to achieve maximum standards of quality and customer service, in alignment with divisional objectives.
  • Will answer related inquiries to various levels of the organization. 

Apply Now More Info

Class A CDL Delivery Driver

Watertown WI

Base Pay: 18

Remedy Intelligent Staffing has an immediate direct hire opportunity for a Class A CDL Delivery Driver Pay: $18.00 Location: Watertown Hours: - Fir...

Remedy Intelligent Staffing has an immediate direct hire opportunity for a Class A CDL Delivery Driver

Pay: $18.00

Location: Watertown

Hours: - First shift - hours will vary depending on location of delivery.

Duties: Load and Unload truck Make deliveries of home building products in Wisconsin. Must have clean driving record

Apply Now More Info

Metal Finisher

Oconomowoc WI

Base Pay: 14.75

Remedy Intelligent Staffing has an Immediate 2nd shift position in Oconomowoc for a metal finisher. Pay:  $14.75 Shift: 2:30-11:00 Duties: &n...

Remedy Intelligent Staffing has an Immediate 2nd shift position in Oconomowoc for a metal finisher.

Pay:  $14.75

Shift: 2:30-11:00

Duties:

  •  Perform machine tending operations and processes; count, stage and record finished parts.
  • Remove burrs and sharp edges from manufactured parts using hand grinders, dynafiles, Burr Master and Tumbler.
  • Pull finished laser cut parts from the load tables and stack on carts.
  • Operate hand/air tools and electric grinders.
  • Verify part counts to the number of parts nested by the laser programmer.
  • Locate parts that have fallen to the ground through the table grates.
  • Accurately complete the Work Order paperwork.
  • Attach applicable part tags.
  • Move laser cut parts to the correct locations based on the next operation as dictated on the Job Travelers.
  • Empty the slag pans daily.
  • Clean the floor under the load table daily at specified time(s).
  • Complete daily 5S requirements.
  • Clean the lasers weekly.
  • Assist in other duties as requested by trainer, manager or supervisor. 

Apply Now More Info

Maintenance

Watertown WI

Base Pay: 20.00

Remedy Intelligent Staffing is hiring for 3rd shift Maintenance Technicians. Pay: $20+ DOE Hours:  2:00PM-10:00PM Duties:  Responsible f...

Remedy Intelligent Staffing is hiring for 3rd shift Maintenance Technicians.

Pay: $20+ DOE

Hours:  2:00PM-10:00PM

Duties: 

  • Responsible for maintaining and repairing plant facilities and equipment to support production, maintaining a preventive maintenance program, and keeping accurate maintenance records.
  • The Maintenance Technician ensures that maintenance requirements/needs are completed in a timely and accurate manner to maintain current production requirements.
  • The Maintenance Technician will use continuous improvement to remain proactive in identifying and addressing maintenance related issues.
  • Completes preventative maintenance on machines
  • Fabricates repair parts 
  • May weld parts using arc or gas welding equipment

Apply Now More Info

3rd Shift Heat Treat Racker

Watertown WI

Base Pay: 13.50

Heat Treat Rackers needed in Watertown, WI!   Hours: Third Shift 10pm-6am Pay:  $13.50 Duties: Taking lawn mower blades and placing...

Heat Treat Rackers needed in Watertown, WI!  

Hours: Third Shift 10pm-6am

Pay:  $13.50

Duties:

Taking lawn mower blades and placing them on a rack in preparation for heat treating.

Apply Now More Info

Heat Treat Racker

Watertown WI

Base Pay: 13.30

Heat Treat Rackers needed in Watertown, WI!   Hours: Second Shift 2pm-10pm Pay:  $13.30 Duties: Taking lawn mower blades and placing...

Heat Treat Rackers needed in Watertown, WI!  

Hours: Second Shift 2pm-10pm

Pay:  $13.30

Duties:

Taking lawn mower blades and placing them on a rack in preparation for heat treating.

Apply Now More Info

1st Shift Press Operator

Watertown WI

Base Pay: 14.00

Remedy Intelligent Staffing is actively seeking a Press Operator for a valued client located in Watertown, WI.  Title: Press Operator Hou...

Remedy Intelligent Staffing is actively seeking a Press Operator for a valued client located in Watertown, WI. 

Title: Press Operator

Hours: 1st Shift 7:00 am - 3:00 pm

Pay: $14.00/hour

Duration: Temp to hire

Job Responsibilities:

  • Set-up and operation of small tonnage presses (typically 350 tons or less)
  • Install specified dies in press using gauges and hand tools 
  • Aligns dies in press according to specifications using feelers, shims, templates, bolts, clamps and wrenches
  • Assists in tool room with inspection of die (when required) upon completion of job 
  • Inserts blanks manually into press and performs either hot or cold form operations 
  • Responsible for accounting for steel usage (as required) and accurately record piecework formed
  • Perform manual mill operations, ensuring beveled edge meets with customer specifications 
  • Capable of adjusting temperatures on Fuse/Anneal ovens and operating to check sheet requirements
  • Capable of operating shot and grit blast machines, knowing which medium is used for each operation
  • Understanding what parts need to be oiled and proper finish prior to leaving cell
  • Check quality of product machined and notify supervisor of process issues
  • Package customers’ parts
  • Maintains safe operations by adhering to safety procedures and regulations.
  • Perform operator maintenance and/or 5S housekeeping per established schedules 

Apply Now More Info

Press Operator

Watertown WI

Base Pay: 14.30

Remedy Intelligent Staffing has immediate openings for Press Operators in Watertown, WI. Pay:  $14.30 Shift: 2nd shift 2:00PM-10:00PM Responsi...

Remedy Intelligent Staffing has immediate openings for Press Operators in Watertown, WI.

Pay:  $14.30

Shift: 2nd shift 2:00PM-10:00PM

Responsibilities:

  • Set-up and operation of small tonnage presses (typically 350 tons or less)
  • Install specified dies in press using gauges and hand tools 
  • Aligns dies in press according to specifications using feelers, shims, templates, bolts, clamps and wrenches
  • Assists in tool room with inspection of die (when required) upon completion of job
  • Inserts blanks manually into press and performs either hot or cold form operations
  • Responsible for accounting for steel usage (as required) and accurately record piecework formed
  • Perform manual mill operations, ensuring beveled edge meets with customer specifications
  • Capable of adjusting temperatures on Fuse/Anneal ovens and operating to check sheet requirements
  • Capable of operating shot and grit blast machines, knowing which medium is used for each operation
  • Understanding what parts need to be oiled and proper finish prior to leaving cell
  • Check quality of product machined and notify supervisor of process issues
  • Package customers’ parts ? Maintains safe operations by adhering to safety procedures and regulations.
  • Perform operator maintenance and/or 5S housekeeping per established schedules

 

 

Apply Now More Info

Press Operator

Watertown WI

Base Pay: 14.50

Remedy Intelligent Staffing is hiring Press Operators in Watertown, WI. Pay: $14.50 Shift:  3rd 10:00PM-6:00AM Duties:  Set-up and opera...

Remedy Intelligent Staffing is hiring Press Operators in Watertown, WI.

Pay: $14.50

Shift:  3rd 10:00PM-6:00AM

Duties:

  •  Set-up and operation of small tonnage presses (typically 350 tons or less) 
  • Install specified dies in press using gauges and hand tools 
  • Aligns dies in press according to specifications using feelers, shims, templates, bolts, clamps and wrenches 
  • Assists in tool room with inspection of die (when required) upon completion of job 
  • Inserts blanks manually into press and performs either hot or cold form operations 
  • Responsible for accounting for steel usage (as required) and accurately record piecework formed
  • Perform manual mill operations, ensuring beveled edge meets with customer specifications 
  • Capable of adjusting temperatures on Fuse/Anneal ovens and operating to check sheet requirements 
  • Capable of operating shot and grit blast machines, knowing which medium is used for each operation
  • Understanding what parts need to be oiled and proper finish prior to leaving cell
  • Check quality of product machined and notify supervisor of process issues 
  • Package customers’ parts 

Apply Now More Info

CNC Machinist

Oconomowoc WI

Base Pay: 15.00 BOE

CNC Machinist Location: Oconomowoc, WI 2nd shift : 2:30 p.m. to 11:00 p.m.  Monday - Friday Pay :  BOE  $15.00+ Overv...

CNC Machinist

Location: Oconomowoc, WI

2nd shift : 2:30 p.m. to 11:00 p.m.  Monday - Friday

Pay :  BOE  $15.00+

Overview:

Perform CNC set-ups and machine operations; load and edit programs; read blueprints and inspect finished parts. Perform manual machine operation set-ups and processes; read blueprints and inspect finished parts. Also perform Orbit Forming and Roller setup and operations.

Responsibilities:

• Understand CNC programming formats, G and M codes and Manual Data Input (MDI)

• Knowledge of set up and operation of CNC machines to produce piece parts according to blueprint

• Edit CNC programs to make adjustments

• Read measuring tools (dial calipers, micrometers)

• Read and interpret engineering blueprints and work orders/instructions

• Operate manual mills, lathe, drill presses and orbital rivet machine

• Perform manufacturing duties to meet daily production standards of quality and quantity

• Complete required part inspection and properly record part count and verification of quality

• Communicate machine down-time, shortages, scrap, delays when applicable

 

Apply Now More Info

CNC Turret Setup & Operate

Watertown WI

Base Pay: 15-18.64 BOE

CNC Turret Set up & Operator  3rd shift:  10:30 p.m. to 6:30 p.m.   Monday - Thursday  Pay is BOE :  $15.00 to $1...

CNC Turret Set up & Operator 

3rd shift:  10:30 p.m. to 6:30 p.m.   Monday - Thursday 

Pay is BOE :  $15.00 to $18.94

 

Perform a variety of CNC Fabrication center functions that include: Setup, programming, and adjustment of related equipment, compilation of setup documentation, input of data for setups and necessary report distribution.

All operations are in accordance with established specifications, schedules and budgets to achieve maximum standards of quality and customer service, in alignment with divisional objectives. Will answer related inquiries to various levels of the organization. 

Will answer related inquiries to various levels of the organization. This position will not supervise a staff but will be responsible for the training of junior level employees. Guidance will be provided on possible sources of information and methods to complete tasks, as well as specific instructions on new work and any variations. Able to meet deadlines and exercise judgement regarding related items

Apply Now More Info

Assembly

Hartland WI

Base Pay: 12.00

Assemblers needed in Harland, WI!  First shift, work 4 10 hour days! Pay:  $12.00-$12.50 Hours:  1st shift 4:30 a.m. to 2:30 p....

Assemblers needed in Harland, WI!  First shift, work 4 10 hour days!

Pay:  $12.00-$12.50

Hours:  1st shift 4:30 a.m. to 2:30 p.m. 4-10 hour days Monday - Thursday

Duties:

  •  Weighing of very small particles to fractions of grams
  • Snipping and crimping wires
  • Repetitive, manual assembly

Apply Now More Info

Assembly

Hartland WI

Base Pay: 12.00

Remedy Intelligent Staffing has immediate 2nd shift openings in Hartland, WI for assembers! Pay:  $12.00 -$12.50 DOE Hours:  2nd shi...

Remedy Intelligent Staffing has immediate 2nd shift openings in Hartland, WI for assembers!

Pay:  $12.00 -$12.50 DOE

Hours:  2nd shift 3:30 p.m. to 1:30 a.m. 4-10 hour days Monday - Thursday

Duties:

  • Stripping and crimping wires 
  • Very repetitious, manual assembly

 

 

Apply Now More Info

Machine Operator

Hartland WI

Base Pay: 14.00

2nd shift Machine Operators needed in Hartland, Wi. Pay:  $14.00 Hours: 3:00 p.m. to 1:00 a.m. 4-10 hour days Monday - Thursday  Job...

2nd shift Machine Operators needed in Hartland, Wi.

Pay:  $14.00

Hours: 3:00 p.m. to 1:00 a.m. 4-10 hour days Monday - Thursday 

Job Duties:

  • Clear jams, operate PLC control panel, troubleshoot and adjust machine, loading, unloading.
  • May also perform baking, unpacking, packing, dip-n-sizing.
  • Must be Mechanically Inclined and have prior experience with mechanized/automated process machinery.

Apply Now More Info

Production Supervisor

Watertown WI

Base Pay: 28.00

Remedy Intelligent Staffing has an immediate 2nd shift opening for a Production Supervisor in Watertown, WI. Hours:  3:00pm-11:00pm Pay: $60,0...

Remedy Intelligent Staffing has an immediate 2nd shift opening for a Production Supervisor in Watertown, WI.

Hours:  3:00pm-11:00pm

Pay: $60,000+  DOE

Production Supervisor Job Duties:

•Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enforcing systems, policies, and procedures.

•Maintains staff by recruiting, selecting, orienting, and training employees; developing personal growth opportunities.

•Maintains work flow by monitoring steps of the process; setting processing variables; observing control points and equipment; monitoring personnel and resources; studying methods; implementing cost reductions; developing reporting procedures and systems; facilitating corrections to malfunctions within process control points; initiating and fostering a spirit of cooperation within and between departments.

•Completes production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring progress; revising schedules; resolving problems; reporting results of the processing flow on shift production summaries.

•Maintains quality service by establishing and enforcing organization standards.

•Ensures operation of equipment by calling for repairs; evaluating new equipment and techniques.

Apply Now More Info

Robotic Welder

Watertown WI

Base Pay: 15.00

Remedy Intelligent Staffing is actively seeking a Robotic Welder for a valued client located in Watertown, WI.  Title: Robotic Welder Hou...

Remedy Intelligent Staffing is actively seeking a Robotic Welder for a valued client located in Watertown, WI. 

Title: Robotic Welder

Hours: 2nd shift 3:00 pm - 11 pm 

Pay: $15/hour. Upon hire, employees could expect great compensation as well as a competitive benefit package.

Duration: Temp to hire

Job Responsibilities:

  • Examine completed work-pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
  • Measure completed work-pieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
  • Set stops on machine beds, change dies, and adjust components when making multiple or successive passes. Weld components in flat, vertical, or overhead positions. Operate safety equipment and use safe work habits. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. See more occupations
  • Start machines, monitor their operations, and record operational data.
  • Set up, operate, or tend machines as instructed and trained 

Apply Now More Info

Heat Treater

Watertown WI

Base Pay: 15.50

Remedy Intelligent Staffing is seeking candidates for Heat Treating Positions in Watertown WI! Positions are on 2nd shift (3:00pm to 11:00pm) and 3...

Remedy Intelligent Staffing is seeking candidates for Heat Treating Positions in Watertown WI!

Positions are on 2nd shift (3:00pm to 11:00pm) and 3rd shift (11pm - 7am) and start immediately.

Pay: $15.50

 Responsibilities:

•Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment and metals.

•Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges.

•Test parts for hardness, using hardness testing equipment. Examine parts to ensure metal shade and color conform to specifications.

•Remove parts from baths after specified times and air dry or cool parts in water or other baths.

•Identify proper racking systems; rack and unrack a variety of parts and safely operate pneumatic hoist through tank lines.

•Perform clean outs of baths with appropriate PPE and safety precautions.

•Operate weigh scale, ensuring correct amount of parts move

 

Apply Now More Info

Robotic Welder

Watertown WI

Base Pay: 15.50

Remedy Intelligent Staffing is seeking candidates to Operate a Robotic Welding Machine  in Watertown WI! Positions are on 3rd shift (11pm - 7a...

Remedy Intelligent Staffing is seeking candidates to Operate a Robotic Welding Machine  in Watertown WI!

Positions are on 3rd shift (11pm - 7am) and start immediately!

 Responsibilities:

• Examine completed work-pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.

• Measure completed work-pieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.

• Set stops on machine beds, change dies, and adjust components when making multiple or successive passes. Weld components in flat, vertical, or overhead positions. Operate safety equipment and use safe work habits. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.

• Start machines, monitor their operations, and record operational data.

• Set up, operate, or tend machines as instructed and trained 

Apply Now More Info

Heavy Press Operator

Watertown WI

Base Pay: 14.50

Remedy Intelligent Staffing is seeking candidates to Operate Heavy Press Machines on 3rd shift in Watertown WI! Pay:  $14.50 Hours:  11:0...

Remedy Intelligent Staffing is seeking candidates to Operate Heavy Press Machines on 3rd shift in Watertown WI!

Pay:  $14.50

Hours:  11:00PM-7:00AM

 POSITION SUMMARY

•Examine completed work-pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.

•Measure completed work-pieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.

•Set stops on machine beds, change dies, and adjust components when making multiple or successive passes.

•Start machines, monitor their operations, and record operational data.

•Set up, operate, or tend machines as instructed and trained 

Apply Now More Info

Straightening Machine Operator

Watertown WI

Base Pay: 13.50

Remedy Intelligent Staffing has immediate 3rd shift positions for machine operators in Watertown. Pay:  $13.50 Hours:  11:00PM-7:00AM Job...

Remedy Intelligent Staffing has immediate 3rd shift positions for machine operators in Watertown.

Pay:  $13.50

Hours:  11:00PM-7:00AM

Job Duties:

  • Continuously bend from waist and reach into container to lift blades onto work counter.
  • Straighten the blades and transfer them into another container for shipment. 

Apply Now More Info

Heat Treat Operator

Watertown WI

Base Pay: 15.50

Remedy Intelligent Staffing is looking for 3rd Shift EXPERIENCED Heat Treat Operators to start IMMEDIATELY! Pay:  $15.50 Hours: 11:00PM-7:00AM...

Remedy Intelligent Staffing is looking for 3rd Shift EXPERIENCED Heat Treat Operators to start IMMEDIATELY!

Pay:  $15.50

Hours: 11:00PM-7:00AM

POSITION SUMMARY: 

  • Responsible for operating, maintaining, and cleaning heat treat machinery and/or equipment. 
  • Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment and metals.
  • Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges. 
  • Test parts for hardness, using hardness testing equipment. Examine parts to ensure metal shade and color conform to specifications. 
  • Remove parts from baths after specified times and air dry or cool parts in water or other baths.
  • Identify proper racking systems; rack and unrack a variety of parts and safely operate pneumatic hoist through austemper tank lines.
  • Perform clean outs of baths with appropriate PPE and safety precautions.
  • Operate weigh scale, ensuring correct amount of parts move to next operation.
  • Check Quality of product machined and notify supervisor of process issues. 

Apply Now More Info

Heat Treat Operator

Watertown WI

Base Pay: 13.30

Remedy Intelligent Staffing has immediate openings on 2nd shift in Watertown for Heat Treat Operators. Pay:  $13.30 Hours:  3:00PM-11:00P...

Remedy Intelligent Staffing has immediate openings on 2nd shift in Watertown for Heat Treat Operators.

Pay:  $13.30

Hours:  3:00PM-11:00PM

POSITION SUMMARY:

  •  Responsible for operating, maintaining, and cleaning heat treat machinery and/or equipment in their respective Business Unit and, may, at times, also be expected to provide support as a Heat Treat Operator to other Business Units.
  • Operators must work safety at all times and efficiently to ensure top productivity and quality in products produced. 
  • Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment and metals. 
  • Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges. 
  • Test parts for hardness, using hardness testing equipment. Examine parts to ensure metal shade and color conform to specifications. 
  • Remove parts from baths after specified times and air dry or cool parts in water or other baths.
  • Identify proper racking systems; rack and unrack a variety of parts and safely operate pneumatic hoist through austemper tank lines. 
  • Perform clean outs of baths with appropriate PPE and safety precautions. 
  • Operate weigh scale, ensuring correct amount of parts move to next operation. 
  • Check Quality of product machined and notify supervisor of process issues.
  • Complete relevant check lists, documentation accurately and timely and per instruction 
  • Maintains safe operations by adhering to safety procedures and regulations
  • Perform operator maintenance and/or 5S housekeeping per established schedules 

Apply Now More Info

Press Helper

Ixonia WI

Base Pay: $12.00

Are Looking to get experience in Machine Operation, this position would be perfect for you.  Apply Today!!!!!!! Press Helper - Stamp Dept 1st...

Are Looking to get experience in Machine Operation, this position would be perfect for you. 

Apply Today!!!!!!!

Press Helper - Stamp Dept

1st shift 6:00 a.m. to 2:30 p.m

Pay : $12.00 an hour

Set up , adjust and operate press break to perform forming, notching , bending and punching operations on a variety of standard machines . Work involves extracting parts from cut skeletons of various steel thicknesses Determine if parts need deoxidizing, manually or through an automatic machine Parts are grinder with hand grinder , counted, sorted and stacked per instructions.

Apply Now More Info

Welder

Oconomowoc WI

Base Pay: $15.00

Great Company to work for Temp to Hire Apply today !!!!! 2nd shift 2:30 p.m. to 11:00 p.m. Pay is BOE Perform MIG welding and fabrication duties...

Great Company to work for Temp to Hire Apply today !!!!!

2nd shift 2:30 p.m. to 11:00 p.m.

Pay is BOE

Perform MIG welding and fabrication duties without the use of fixtures; layout, fit and position weldments sequentially to create a custom stair-lift. Work from prints, drawings and job layouts.

Use measuring tools to verify alignment and dimensions. Grind to mechanical requirements with a smooth cosmetic finish. Work is subject to first and final piece inspections for alignment, dimensions and aesthetic requirements. assignments to meet daily production while maintaining standards of quality and quantity 

Apply Now More Info

Technical Service Representative

Oconomowoc WI

Base Pay: $16.00

Remedy is now hiring for a Technical Service Representative  1st shift hours  Serve customers via telephone call-center to provide produc...

Remedy is now hiring for a Technical Service Representative 

1st shift hours 

Serve customers via telephone call-center to provide product installation and service information.

Perform troubleshooting diagnostics on company products and instruct customers on proper functioning by reviewing engineering drawings and dimensions. Work in a fast-paced environment and multi-task using computer software during customer discussions.

Collect and analyze data for continuous improvement. Maintain proficiency in product knowledge/troubleshooting and customer instruction Verbally respond promptly to incoming customer telephone calls in a telephone queue and emails

Perform troubleshooting diagnostics on company products via telephone Address complaints concerning product performance, referring complaints of service failures to designated departments for investigation Accept parts orders by completing telephone and online requests Return calls from messages left by customers Perform clerical duties that support customer satisfaction 

Apply Now More Info

Outside Sales Representative

Watertown WI

Base Pay: $40,000

Remedy Intelligent Staffing has an immediate opening for an Outside Sales Representative at our client company located in Watertown, WI. Summary:&n...

Remedy Intelligent Staffing has an immediate opening for an Outside Sales Representative at our client company located in Watertown, WI.

Summary:  Our growing business is in need of an Outside Sales Representative to increase sales in our Wisconsin territory. The successful candidate will work establishing relationships with existing customers, identifying new opportunities, and following up on potential leads. The Outside Sales Representative will also monitor industry trends in order to identify emerging markets and develop plans to utilize those markets to expand revenue. 

Duties:

  • Opening new accounts with new customers
  • Introduce new or existing product(s) to targeted accounts.
  • Effectively answer questions related to products, quality control, etc.
  • Work with other sales representatives to ensure customer satisfaction and education. 
  • Working with assigned inside sales to complete orders.
  • Keep up to date with the latest developments and/or changes on specific products. 
  • Communicate activities, concerns, trends, and any other reports to management

Apply Now More Info

Maintenance Technician

Watertown WI

Base Pay: 20.00

Remedy Intelligent Staffing is hiring for 3rd shift Maintenance Technicians. Pay: $20+ DOE Hours:  10:00PM-6:00AM Duties:  Responsible f...

Remedy Intelligent Staffing is hiring for 3rd shift Maintenance Technicians.

Pay: $20+ DOE

Hours:  10:00PM-6:00AM

Duties: 

  • Responsible for maintaining and repairing plant facilities and equipment to support production, maintaining a preventive maintenance program, and keeping accurate maintenance records.
  • The Maintenance Technician ensures that maintenance requirements/needs are completed in a timely and accurate manner to maintain current production requirements.
  • The Maintenance Technician will use continuous improvement to remain proactive in identifying and addressing maintenance related issues.
  • Completes preventative maintenance on machines
  • Fabricates repair parts 
  • May weld parts using arc or gas welding equipment

Apply Now More Info

Straightening Machine Operator

Watertown WI

Base Pay: 13.30

Remedy Intelligent Staffing has immediate 2nd shift Machine Operator positions in Watertown,WI. Pay:  $13.30 Hours:  2:00PM-10:00PM  ...

Remedy Intelligent Staffing has immediate 2nd shift Machine Operator positions in Watertown,WI.

Pay:  $13.30

Hours:  2:00PM-10:00PM

 ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Continuously bend from waist and reach into container to lift blades onto work counter, straighten the blades and transfer them into another container for shipment.  

Apply Now More Info

Staff Bios

Jim Holwerda Owner
Contact More Info
  • Bachelors – Business Administration
  • With Remedy August 2008 to present, 16 years industry experience
  • President – SHRM Dodge County
  • 40 under 40 INBusiness Magazine
  • YMCA of Dodge County – Secretary
Rebecca (Becky) Romens Regional Director
Contact More Info
  • Started with Remedy August 2016, 20 years in industry
  • BS, Marketing/Management, University of Wisconsin - LaCrosse
  • Current Ambassador – Fort Atkinson Chamber of Commerce; Former President, 2012; Former Board Member, 2006-2013
Chris Cornell Market Manager
Contact More Info
  • With Remedy since August 2015, 16 years’ industry experience
  • Workers Compensation Certified
  • Management and Leadership Seminars
Briana Smith Account Executive
Contact More Info
  • Joined Remedy in November 2017
  • University of Wisconsin – Madison BS Neurobiology and Psychology
  • Chartered Life Underwriter Designation CLU®
  • Treasurer of Lake Country Montessori School
  • Sponsor of Oconomowoc Newcomers & Neighbors
  • Past Treasurer of Oconomowoc Newcomers & Neighbors
Anna Arndt Recruiter
Contact More Info
  • Joined Remedy January 2017, 12 years of previous recruiting experience
  • Business Management degree from Madison Area Technical College
Amanda Brazee Recruiter
Contact More Info
  • Started with Remedy in November 2017
  • High School graduate of Hartford High School
  • Member of Hartford Area Chamber-Commerce