We asked the nation’s blue-collar workers what matters most to them. Join our webinar on May 19th to find out what they said! Click here to read more.

close

Branch No: 81520-7756
2949 Erie Boulevard East
Suite 100
Syracuse, NY 13224
Phone: (315) 299-6977

Available Positions

Material Handler

Syracuse NY

Base Pay: 15.00 per HOUR

Remedy is partnered with a growing manufacturing company in the Syracuse area! Looking for skilled Material Handlers! Job duties: Obtains approve...

Remedy is partnered with a growing manufacturing company in the Syracuse area! Looking for skilled Material Handlers!

Job duties:

  • Obtains approved materials from Receiving Department and distributes these to the manufacturing floor as well as to Mezzanine or offices areas. Refers to labels to determine destination of parts or refers to spreadsheet where labels are missing.
  • Enters location as needed where part number is missing and informs Stockroom Clerk or Supervisor to ensure new or corrected information is documented into company information system.
  • Responds to materials/parts requests from Production Supervisors, obtaining and delivering to the Storeroom or production floor.
  • Maintains watch over packaging and chemical supplies to ensure adequate supplies are on hand.
  • Reviews packaging material supplies to ensure sufficiency. Writes down part numbers for ‘clamshell’ and reports any discrepancies to Stockroom Clerk or Supervisor.
  • Performs counts of chemical containers for Board Shop using spreadsheet to check needed versus available.
  • Advises Stockroom Clerk who enters orders where shortages exist or are anticipated.

Shift:

  • 1st-7am-3:30pm M-F
  • 2nd-3:30pm-12am M-F

If you are interested in the role please give the office a call @ 315-299-6977 or apply online at remedystaff.com!

Apply Now More Info

Facilities Maintenance

Liverpool NY

Base Pay: 20-30

Now Hiring for Facilities Maintenance  Great candidate should be Self Motivated, Hard Working and have the ability to work with little to no s...

Now Hiring for Facilities Maintenance 

Great candidate should be Self Motivated, Hard Working and have the ability to work with little to no supervision.

Pay: 20-30 p/h DOE

Typical Job Duties may involve:

  • Grounds keeping – to include but not limited to mowing, gardening (weeding & planting), pruning trees, watering and fertilizing lawn
  • Maintenance of irrigation system and driveways/sidewalks (snow clearing in winter)
  • Appropriately operate equipment and machinery as necessary
  • Inspect machinery and mechanical equipment for repairs; and execute repairs if able
  • Support miscellaneous renovation or reorganization projects on property as needed
  • Perform preventive maintenance, repairs, and installations such as:
    • Wood staining or painting
    • Fireplace cleaning
    • Pool & spa cleaning
    • Power washing of necessary areas
  • Facilitate necessary maintenance
    • Pool & spa area
    • Vehicles
    • Machinery
    • Boat & Recreational water equipment

Apply Now More Info

Material Handler (Forklift Driver)

Liverpool NY

Base Pay: 16-17

Material Handler Positions Available in Syracuse. 1st Shift 9am-530pm Monday-Friday Pay: 16-17 per hour Job Specifics:  -Replenishing war...

Material Handler Positions Available in Syracuse.

1st Shift 9am-530pm Monday-Friday

Pay: 16-17 per hour

Job Specifics:

 -Replenishing warehouse storage locations.

 -Picking/pulling orders.

  -Supply required material to line operators based on the production schedule.

 - Completing accurate systematic moves (that mirror physical moves of material)

 - And participation in cycle counting activities to maintain accurate inventory records.

Preferred Abilities:

- Previous forklift experience (sit down, stand-up/dock stocker, or electric pallet jack (EPJ)/walkie-rider).

- Previous experience with an Enterprise Resource Planning (ERP) software for inventory management.

- Ability to become forklift certified.

- Ability to work in a fast-paced environment.

- Ability to lift up to 50lbs.

- Ability to stand and/or sit for 10 hours shifts.

- Ability to maintain exceptional attendance record.

All candidates have the potential to be converted to a full-time JMA associate after completing 90 days. Primary factors towards conversion are attendance, productivity, and attitude.

Apply Now More Info

CNC Shift Lead

Liverpool NY

Base Pay: 27-36

Immediate Opening for a CNC Shift Lead in Liverpool 2nd Shift: 1pm-915pm 27-36 per hour DOE General Duties: Lead daily management meetings with sh...

Immediate Opening for a CNC Shift Lead in Liverpool

2nd Shift: 1pm-915pm

27-36 per hour DOE

General Duties:

  • Lead daily management meetings with shift personnel to.
  • Process troubleshooting / repair.
  • Perform the efficient setup of machines as needed in accordance with the master schedule.
  • General operator oversight.
  • Work closely with Managers and Supervisors during employee reviews to determine and promote safety, safety, competency, knowledge, quality and efficiency.

Desired Requirements:

  • A minimum of 1-year Leadership experience supporting a manufacturing facility.
  • Demonstrated performance meeting the requirements of the Setup Technician I role.
  • Ability to read and interpret part drawings.
  • Ability to multi-task, working in a fast-paced, ever-changing environment.
  • Excellent organization, communication, judgment, and problem-solving skills.

Apply Now More Info

CNC Maintenance Tech

Liverpool NY

Base Pay: 25-36

Immediate Opening for a CNC Maintenance Tech in Liverpool 2nd Shift: 1pm-915pm Monday-Friday Pay 25-36 DOE General Duties: Execute lock out tag ou...

Immediate Opening for a CNC Maintenance Tech in Liverpool

2nd Shift: 1pm-915pm Monday-Friday

Pay 25-36 DOE

General Duties:

  • Execute lock out tag out procedures to safely access and work on internal machine components.
  • Complete and document preventative maintenance tasks on CNC equipment.
  • Complete and document common CNC repair tasks including but not limited to: cable/sensor replacement, coolant/lubrication pump/valve repairs, fuse replacement, circuit breaker resets etc.,
  • Read and interpret specifications, schematics and parts manuals to facilitate the maintenance repair of CNC and associated equipment.

Desired Qualifications:

  • Ability to read, write and communicate in English.
  • Ability to perform arithmetic and simple algebraic functions.
  • Ability to utilize hand tools and have basic mechanical ability.
  • Have the skill to read prints, decipher tolerances, proven capability with measuring tools such as calipers, micrometers, bore gages etc.
  • Minimum of 1 year experience working on/with CNC machines including troubleshooting/correction of machine related issues.

Apply Now More Info

Loader/Unloader

Syracuse NY

Base Pay: 18.00 per HOUR

New One day Opportunity in the North Syracuse area! Unloading rugs from trucks and organizing them in the warehouse. This is a one day assignment t...

New One day Opportunity in the North Syracuse area!

Unloading rugs from trucks and organizing them in the warehouse.

This is a one day assignment that pays 18/hr !

Shift - 9:30a- TBD

They anticipate the job going for 4-6hrs.

Must be able to lift up to 40lbs.

APPLY NOW! For immediate consideration ,apply on our website at www.remedystaff.com OR call our office at 315-299-6977.

Apply Now More Info

Warehouse Associate

Syracuse NY

Base Pay: 15.00 per HOUR

Remedy is partnered with a growing manufacturing company in the Syracuse NY area! Looking for skilled warehouse associates!  Job Summary: Resp...

Remedy is partnered with a growing manufacturing company in the Syracuse NY area! Looking for skilled warehouse associates! 

Job Summary:

Responsible for performing all required operating procedures and running production equipment for one packaging as well as one palletizing equipment.

Essential Duties and Responsibilities:

· Set up, operate and clean all assigned equipment in accordance with standard operating procedures.

· Ensure caser coders, sealers, conveyer controls and robot/palletizer are operating correctly and troubleshoot when errors arise.

· Clear any jam-ups and restore production line operation.

· Troubleshoot equipment in accordance with established procedures.

· As required, set up, operate and clean the following equipment: python, repro-tank, bundler, bailer, trash compactor and foamer, while completing all required documentation.

· Maintain sanitation and cleanliness of immediate area. Use personal protective equipment when handling chemicals.

· Monitor your assigned equipment for quality of production. Notify Shift Manager or designate of problems

· Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintain SQF readiness, and HACCP.

Shift: 1am-9:30am

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com! 

Apply Now More Info

Manufacturing Technician

East Syracuse NY

Base Pay: Hourly

Remedy is partnered with a growing manufacturing company in the Syracuse area! Looking for a skilled Manufacturing Technician! Job Duties: • B...

Remedy is partnered with a growing manufacturing company in the Syracuse area! Looking for a skilled Manufacturing Technician!

Job Duties:

• Background/experience in mechanical assembly

• Experience with circuit boards, electrical equipment, measuring devices and hand tools

• Exceptional fine motor skills

• Ability to follow both written and verbal assembly instructions

• Attention to detail • Cleanroom environment with an understanding and importance of cleanliness.

• Strong work ethic

• Computer skills a plus

Shift: 3:30pm-12am M-F Resume Required!!

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Apply Now More Info

Press Apprentice

Syracuse NY

Base Pay: 16.00 per HOUR

Remedy is paired with a growing Manufacturing company in the North Syracuse area! Job Requirements: Ensure pressrooms are clean and maintained wi...

Remedy is paired with a growing Manufacturing company in the North Syracuse area!

Job Requirements:

  • Ensure pressrooms are clean and maintained with necessary materials; attend to paper staging areas when needed
  • Be attentive and receptive to supervisor, press operator and pre-stage training and feedback; the success of the press apprentice role is a pre-requisite for a press operator role

If interested in the role please call the office at 315-299-6977 and ask for Kali! Apply at remedystaffing.com today!

Apply Now More Info

Transformer Assembler

Preble NY

Base Pay: 18.00 per HOUR

Remedy is partnered with a growing manufacturing company in Preble NY! Job Duties: Disassemble parts from tank, send parts to assembly. 1. Clean o...

Remedy is partnered with a growing manufacturing company in Preble NY!

Job Duties:

Disassemble parts from tank, send parts to assembly.

1. Clean out and tag parts bucket.

2. Remove arrestors, neutral strap and ground lugs.

3. Disconnect HV leads and disassemble lid. A. Remove terminal tops & rods. B. Remove bushings.

4. Disassemble LV Bushings. A. Remove LV leads. B. Remove LV terminal. C. Remove LV bushings.

5. Disassemble Breaker/DVS/Tap changer/Magnex. A. If overload wire, remove with Needle Nose Pliers & Remove light. B. Disassemble handles from tank with all switches and slide switch into tank.

6. Remove core bolts.

7. Process paperwork and tag core/coil.

8. Take parts bucket to assembly shelves.

Shift: 6am-4:30pm

If you are interested in the roll please give the office a call at 315-299-6977 and ask for Kassidy!

Apply Now More Info

Electronic Assembler

Rome NY

Base Pay: 14.00 per HOUR

Remedy is partnered with a growing company in the Rome, NY area! Offering great benefits and great pay! Job Duties: High degree of manual dexteri...

Remedy is partnered with a growing company in the Rome, NY area! Offering great benefits and great pay!

Job Duties:

  • High degree of manual dexterity & eye-hand coordination are required
  • Must be physically able to efficiently & independently perform job duties
  • Must be detail & quality oriented and take pride in work
  • Must be able to read and understand wiring diagrams, wire charts, drawings, illustrations, photographs, etc.
  • Must know and understand required assembly outcome, wiring component function, assembly methods, machine/tool set-up, and procedures
  • Must have the ability to plan, organize and complete work in a timely manner
  • Must be able to understand and consistently meet quality standards and production goals as set by management
  • Must possess a working knowledge of wire cutting and terminating equipment, proper use of wire terminals, splices, etc.
  • Must be able to make decisions based on information and experience
  • Be able to consistently produce defect free wires/wiring assemblies
  • Must be flexible and team oriented to meet the demands of the business
  • Must have basic computer skills Experience a plus but not required

Shift: 7am-3:30pm M-F

If you are interested in the role please give the office a call at 315-299-6977 and ask for Katie!

Apply Now More Info

Production Associate

Cazenovia NY

Base Pay: 18.00 per HOUR

Remedy is partnered with a growing manufacturing company in the Cazenovia New York area. Job Duties: ? Select, set up and operate equipment necess...

Remedy is partnered with a growing manufacturing company in the Cazenovia New York area.

Job Duties:

? Select, set up and operate equipment necessary to create desired assembly.

? Clear simple part jams and machine faults and perform changeover of parts as required.

? Review the quality of finished assemblies and perform basic testing and troubleshooting duties.

? Pack completed switches for shipment.

? Document production on daily basis.

Shift: 6am-4:30pm M-Th

If you are interested in the roll please give the office a call at 315-299-6977 and ask for Kali!

Apply Now More Info

Machine Operator

Kirkville NY

Base Pay: 16.00 per HOUR

Remedy is looking for Machine Operators in the Kirkville, NY area! Remedy offers free online courses, weekly pay and great benefits! Shift: 7am-3:...

Remedy is looking for Machine Operators in the Kirkville, NY area!

Remedy offers free online courses, weekly pay and great benefits!

Shift: 7am-3:30pm

*Looking for a skilled machine operator who is open to train to become a CNC Machine Operator!*

Essential Job Functions:

  • Load production machinery bar loader with raw material.
  • Perform tool, holder or attachment adjustments/changes as necessary to maintain part quality.
  • Assure parts meet customer specifications by measuring parts per inspection plan. Enter SPC as required and properly respond to out of control conditions.
  • Alert QC or supervisor if there are any questions/concerns regarding part quality.
  • May maintain and lubricate machine tools and equipment as needed.
  • Complete all paperwork per proper procedures (routing card, tool change logs, count sheets etc.).
  • Properly identify parts and enter production into information system.
  • Communicate all information needed to assure smooth shift transition with prior/next shift at all times.

Shift: 1st 7am-3:30pm

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Apply Now More Info

Machine Operator

Ithaca NY

Base Pay: 18.00 per HOUR

Remedy is looking for skilled Machine Operators in the Ithaca, NY area! Remedy offers free online courses, weekly pay and great benefits! Shift: 7a...

Remedy is looking for skilled Machine Operators in the Ithaca, NY area!

Remedy offers free online courses, weekly pay and great benefits!

Shift: 7am-3:30pm

Essential Job Functions:

*Various openings exist in our Mill, Lathe, Grind, Polish, CNC, EDM and Weld manufacturing cell areas for qualified machine operators*

  • Experience appreciated but not required.
  • Set up, operation and function of machinery to perform a variety of machine operations on various metal alloy parts according to prescribed specifications in processes, layout, blueprint and/or work instructions.
  • Ability to read, understand and work to process sheets and blueprints.
  • Must be able to work to tight tolerances and possess a strong mathematical aptitude.
  • At all times, work to company Code of Ethics, Safety Standards and Quality Policies while performing operational functions.
  • Ability to work independently as well as in a team environment.
  • Excellent verbal and written skills a must.
  • Must be able to push, pull and/or lift up to and including 70 pounds. 
  • Must pass a physical examination including drug testing.
  • Background checks also performed.

Shift: 7am-3:30pm

If you are interested in the role please give the office a call @ 315-299-6977 or apply online at remedystaff.com

Apply Now More Info

CNC Operator

Liverpool NY

Base Pay: 20.70-28.75

Immediate openings for a 3rd shift CNC Operators. Schedule: Monday - Friday 9pm-5:15am Pay: 20.75-28.75 DOE General Duties: Operate a si...

Immediate openings for a 3rd shift CNC Operators.

Schedule: Monday - Friday 9pm-5:15am

Pay: 20.75-28.75 DOE

General Duties:

  • Operate a single CNC Machine Group (Mori-Sieki, Citizen, or Multi-Spindle) to produce high quality precision machined components to meet/exceed established machine utilization goals.
  • Perform routine in-process inspections and document results in accordance with established quality control procedures.
  • Make prescribed tool offsets and replace worn/damaged tooling as instructed to maintain dimensional stability.
  • Respond to and resolve basic machine alarms/faults.
  • Escalate machine breakdown, quality and unresolved alarm/fault issues to CNC Shift Lead and/or Supervisor to minimize machine downtime.
  • Perform daily housekeeping and machine maintenance tasks to ensure safe/effective machine operation.

Desired Requirements:

  • Prior CNC experience in a Production environment
  • Must be able to perform simple arithmetic, utilize hand tools, and have basic mechanical abilities 
  • Must have the skill to read prints, decipher tolerances, proven capability with measuring tools such as calipers, micrometers, bore gages, vision systems, etc. 
  • Must have positive attitude and ability to multi-task, working in a fast-paced, ever-changing environment.
  • Open to continuing education/on-the-job training for career development/advancement opportunities.

Apply Now More Info

Manufactuing Technician

Ithaca NY

Base Pay: Hourly

Remedy is partnered with a growing manufacturing company in the Ithaca Ny Area! Job Duties: • Performs all tasks related to the incoming insp...

Remedy is partnered with a growing manufacturing company in the Ithaca Ny Area!

Job Duties:

• Performs all tasks related to the incoming inspection of mechanical and electrical parts and assemblies related instrument product lines. Common tools used for inspection are verniers, micrometers, multi-meters, etc.

• Produce and perform assembly operations for wiring sub-assemblies, assemblies, and harnesses in accordance with engineering drawings and specifications.

• Soldering to meet industry standards (J-STD and/or IPC 610)

• Produce and perform assembly operations for mechanical, electro-mechanical or pneumatic assemblies, subassemblies and component parts in accordance with engineering drawings and specifications.

• Helps resolve documentation issues or manufacturing quality problems

• Perform in-process product testing to documented quality control procedures prior to transfer to systems test

• Perform other, ad hoc activities as needed to support the manufacturing and plant operations.

• Assists in maintaining an adequate inventory of supplies related to manufacturing operations.

• Cleans workshop spaces, including bench, parts bins, and storage shelves. Maintains the work center in a safe and orderly manner.

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Apply Now More Info

Sr. Testing Enginer

Ithaca NY

Base Pay: 25.00 per HOUR

Remedy is partnered with a growing manufacturing company in the Ithaca NY Area! Job Duties: The Sr. Manufacturing Test Technician / Associat...

Remedy is partnered with a growing manufacturing company in the Ithaca NY Area!

Job Duties:

  • The Sr. Manufacturing Test Technician / Associate Test Engineer is responsible for assembly, in-process and final acceptance testing for all products.
  • The incumbent conducts all aspects of QC testing of products and related components.
  • Troubleshoots and corrects issues at the component level.
  • Provides and maintains accurate and reliable QC test records.
  • Utilizes computer databases for recording and tracking of QC tests performed.
  • At times will support R & D team on the development of new products and will assist the Quality team to resolve supplier quality issues.

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Apply Now More Info

Operator Trainee

Liverpool NY

Base Pay: 16.00 per HOUR

Remedy is paired with a growing manufacturing company in the Liverpool area! Job Description: Apply water-based coatings on bulk rolls of paper Em...

Remedy is paired with a growing manufacturing company in the Liverpool area!

Job Description:

Apply water-based coatings on bulk rolls of paper

  • Employees will start as a machine tender and be trained to become a Machine Operator within 9-15+ Months
  • This is a physical position which will offer periods of downtime; employee will always be responsible for watching the machine to ensure it is running properly
  • Anyone with mechanical, packaging, machine operating or paper industry experience is preferred but not required

If you are interested in the role, please call Kali at 315-299-6977. Apply on remedystaffing.com

 

Apply Now More Info