Job Not Found

Remedy is partnered with a growing manufacturing in the Liverpool, NY area offering great benefits and great pay!

Job duties:

• Performs various jobs as assigned.
• Closely follows directions to perform jobs, operate equipment, hold or supply materials and tools, and load or unload items on equipment and production lines.
• Loads and unloads deliveries from trucks as needed.
• Performs other related duties as assigned.
• Job descriptions are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee

Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice

If you are interested please give the office a call at 315-299-6977!

Remedy is partnered with a growing manufacturing in the Liverpool, NY area offering great benefits and great pay!

Job duties:

• Performs various jobs as assigned
• Closely follows directions to perform jobs, operate equipment, hold or supply materials and tools, and load or unload items on equipment and production lines
• Loads and unloads deliveries from trucks as needed
• Performs other related duties as assigned
• Job descriptions are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee

Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice.

If you are interested please give the office a call at 315-299-6977!

Remedy Staffing is Seeking Cable Assemblers to Work in Liverpool.

Pay $15-$17.25

Shifts:

1st Mon-Thur. 5am-330pm

2nd Mon-Thur. 330pm-2am

Weekend Fri-Sun 5am-530pm

Jumper Assemblers create cables of various lengths used by cell phone antennas.

Job Duties:

• Assemblers remove end of cable insulation
•  installs end connectors
•  tests finished product
•  Packages for shipment.

Must be able to meet production standards and ensure the quality of the product is within optimal condition.

Requirements:

• No prior experience needed, but previous assembly experience is a plus.
•  Must be able to stand for 10-12 hour shifts.
•  Ability to work in a fast-paced environment.
•  Ability to maintain exceptional attendance record.

All candidates have the potential to be converted to a full-time employees after completing 480 hours. Primary factors towards conversion are attendance, productivity, and attitude.

Apply at RemedyStaffing.com

Remedy is partnered with a growing manufacturing company in Liverpool NY!

Job responsibility:

Work with Team to ensure parts are clean, tidy and packed after being molded.

Hours:

1st 7am-3:30pm

2nd 3pm-11:30pm 

If you are interested please give the office a call at 315-299-6977 and ask for Kassidy!

Remedy is partnered with a growing manufacturing company in the East Syracuse area!

Job duties:

1. Checks weights of sand, catalyst and binders and reports discrepancies from specifications to supervisor
2. Using Pacemaster machine , fills and vibrates molds while manually packing sand
3. Strikes off excess sand
4. Uses rollover machine or manually strips pattern when sand has hardened
5. Inspects mold for flaking sand, broken parts, etc. and condition of pattern
6. May assist Plaster Molders loading molds into ovens
7. Performs routine machine maintenance
8. Completes and/or maintains required reports and records
9. Meets quality and quantity standards for the position
10. Proactively supports the ISO process approach to quality management and the Syteline MIS system
11. Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping
12. Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct
13. Maintains a positive professional approach with all internal and external controls
14. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)
15. Performs other tasks as directed

If you are interested in the role please give the office a call at 315-299-6977 and ask for Kali! Apply at remedystaffing.com today!

Remedy is paired with a growing manufacturing industry in the East Syracuse area!

Summary/Objective:

• Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish by performing the following duties:

Job Responsibilities:

• Shovels or pours abrasives such as sand, grit, or shot of specified grade into machine hopper
• Masks specified areas of object to protect from abrading action
• Loads parts on racks in enclosed rooms, into tumbling barrels, or into cabinets
• Turns valves on equipment to regulate pressure and composition of abrasive mixture flowing through nozzle or into tumbling barrel
• Starts equipment that directs blast or flow of abrasive laden compressed air, gas, or liquid over surface of parts
• Directs nozzle over surface of large parts or inserts arms through glove fitted cabinet openings and manipulates small parts under nozzle for specified interval
• Documents actions by completing production and quality logs
• Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping
• Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct
• Proactively supports the ISO process approach to quality management and the Syteline MIS system
• Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)
• Performs other tasks as directed including deburring parts and performing other operations during cycle
• Conceptual Skills, Process Improvement, Verbal Communication, Functional Skills, Coordination, Inventory Control, Attention to Detail, Judgment

If interested in the role please call 315-299-6977 and ask for Kali! Apply at remedystaffing.com

Remedy is paired with a growing Manufacturing company in the North Syracuse area!

Job Requirements:

• Ensure pressrooms are clean and maintained with necessary materials; attend to paper staging areas when needed
• Be attentive and receptive to supervisor, press operator and pre-stage training and feedback; the success of the press apprentice role is a pre-requisite for a press operator role

If interested in the role please call the office at 315-299-6977 and ask for Kali! Apply at remedystaffing.com today!

Remedy is partnered with a growing manufacturing company in the Syracuse area! Looking for a skilled Testing Technician!

Job Duties:

• Background / understanding of test sequences and requirements

• Background/experience in mechanical assembly

• Experience with circuit boards, electrical equipment, measuring devices and hand tools

• Very analytical, organized and ability to follow step by step instructions

• Ability to grow into troubleshooting failures for efficient and effective resolutions to issues.

• Strong computer knowledge • Detail oriented • Cleanroom environment with an understanding and importance of cleanliness.

• Strong work ethic

Shift: 3:30pm-11:30pm M-F Weekend shift available! Resume Required!!

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Remedy is partnered with a growing manufacturing company in the Syracuse area!

Looking for a skilled Manufacturing Technician!

Job Duties:

• Background/experience in mechanical assembly

• Experience with circuit boards, electrical equipment, measuring devices and hand tools

• Exceptional fine motor skills

• Ability to follow both written and verbal assembly instructions

• Attention to detail

• Cleanroom environment with an understanding and importance of cleanliness.

• Strong work ethic

• Computer skills a plus

Shift: 3:30pm-12am M-F Resume Required!!

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Material Handler Positions Available in Liverpool NY.

1^st Shift 5am-330pm Monday-Thursday

Job Specifics:

 -Replenishing warehouse storage locations.

 -Picking/pulling orders.

  -Supply required material to line operators based on the production schedule.

 - Completing accurate systematic moves (that mirror physical moves of material)

 - And participation in cycle counting activities to maintain accurate inventory records.

Preferred Abilities:

- Previous forklift experience (sit down, stand-up/dock stocker, or electric pallet jack (EPJ)/walkie-rider).

- Previous experience with an Enterprise Resource Planning (ERP) software for inventory management.

- Ability to become forklift certified.

- Ability to work in a fast-paced environment.

- Ability to lift up to 50lbs.

- Ability to stand and/or sit for 10 hours shifts.

- Ability to maintain exceptional attendance record.

All candidates have the potential to be converted to a full-time JMA associate after completing 90 days. Primary factors towards conversion are attendance, productivity, and attitude.

Apply at RemedyStaffing.com

Now Hiring for Facilities Maintenance 

Great candidate should be Self Motivated, Hard Working and have the ability to work with little to no supervision.

Pay: 20-30 p/h DOE

Direct Hire; Seasonal with potential to be a year round position.

Typical Job Duties may involve:

• Grounds keeping – to include but not limited to mowing, gardening (weeding & planting), pruning trees, watering and fertilizing lawn
• Maintenance of irrigation system and driveways/sidewalks (snow clearing in winter)
• Appropriately operate equipment and machinery as necessary
• Inspect machinery and mechanical equipment for repairs; and execute repairs if able
• Support miscellaneous renovation or reorganization projects on property as needed
• Perform preventive maintenance, repairs, and installations such as:
• Wood staining or painting
• Fireplace cleaning
• Pool & spa cleaning
• Power washing of necessary areas
• Facilitate necessary maintenance
• Pool & spa area
• Vehicles
• Machinery
• Boat & Recreational water equipment

Apply at RemedyStaffing.com for immediate consideration.

Now hiring for a 3^rd shift CNC Machinist.

Schedule: Sunday - Thursday 9pm-5:15am

Pay: 18.50-25.30 DOE

General Duties:

• Operate a single CNC Machine Group (Mori-Sieki, Citizen, or Multi-Spindle) to produce high quality precision machined components to meet/exceed established machine utilization goals.
• Perform routine in-process inspections and document results in accordance with established quality control procedures.
• Make prescribed tool offsets and replace worn/damaged tooling as instructed to maintain dimensional stability.
• Respond to and resolve basic machine alarms/faults.
• Escalate machine breakdown, quality and unresolved alarm/fault issues to CNC Shift Lead and/or Supervisor to minimize machine downtime.
• Perform daily housekeeping and machine maintenance tasks to ensure safe/effective machine operation.

Desired Requirements:

• Prior CNC experience in a Production environment
• Must be able to perform simple arithmetic, utilize hand tools, and have basic mechanical abilities 
• Must have the skill to read prints, decipher tolerances, proven capability with measuring tools such as calipers, micrometers, bore gages, vision systems, etc. 
• Must have positive attitude and ability to multi-task, working in a fast-paced, ever-changing environment.
• Open to continuing education/on-the-job training for career development/advancement opportunities.

Apply at RemedyStaffing.com

Now Hiring for Test Lab Technicians

Pay: $30,000-$40,000

Responsibilities:

• Completion of Electrical, Mechanical, and Environmental test using a variety of lab equipment.
• Maintenance and calibration of equipment in a manufacturing setting.
• Assembly and testing of prototype devices in support of engineering products.
• Debug and diagnosis of customer returns and engineering products.

Qualifications:

• Previous experience in a mechanical / electrical fields.
• Certifications or related technical training in Electronic Technology or Telecommunications preferred but not required
• Working knowledge of Microsoft Office and Adobe Acrobat.
• Possess a high attention for detail and quality of work.
• Motivated to take initiative and resolve problems.

Apply at RemedyStaffing.com

Remedy is partnered with a growing manufacturing company in the East Syracuse area!

Job duties:

1. Checks weights of sand, catalyst and binders and reports discrepancies from specifications to supervisor
2. Using Pacemaster machine , fills and vibrates molds while manually packing sand
3. Strikes off excess sand
4. Uses rollover machine or manually strips pattern when sand has hardened
5. Inspects mold for flaking sand, broken parts, etc. and condition of pattern
6. May assist Plaster Molders loading molds into ovens
7. Performs routine machine maintenance
8. Completes and/or maintains required reports and records
9. Meets quality and quantity standards for the position. • Proactively supports the ISO process approach to quality management and the Syteline MIS system
10. Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping
11. Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct
12. Maintains a positive professional approach with all internal and external controls
13. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)
14. Performs other tasks as directed. Shift: 3pm-1:30am M-F

If you are interested in the role please give the office a call at 315-299-6977 and ask for Kali! Apply at remedystaffing.com

Remedy is partnered with a growing manufacturing company in the Cazenovia New York area.

Job Duties: 

1. Select, set up and operate equipment necessary to create desired assembly
2. Clear simple part jams and machine faults and perform changeover of parts as required
3. Review the quality of finished assemblies and perform basic testing and troubleshooting duties
4. Pack completed switches for shipment
5. Document production on daily basis

If you are interested in the roll please give the office a call at 315-299-6977 and ask for Kali! Apply at remedystaffing.com today!

Remedy is paired with a growing manufacturing industry in the East Syracuse area!

Summary/Objective:

Straighten and heat treat castings prior to machining or shipment to customer

Job Responsibilities:

• Using grinder and sanders, removes gate stubs from castings to grind to a witness
• Sets up and loads castings into T-4 oven
• Using fixtures, gauges, hammer, templates, straight edge, etc., straightens and aligns castings to proper geometries to Foundry methods
• Sets up and loads straightened castings into T-6 oven and ages to customer specifications
• Verifies counts with traveler and routes as specified
• Coordinates maintenance of test bar traceability
• Documents actions by completing production and quality logs
• Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping
• Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct
• Proactively supports the ISO process approach to quality management and the Syteline MIS system
• Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)
• Performs other tasks as directed
• Strong attention to detail
• Conceptual Skills, Process Improvement, Verbal Communication, Functional Skills, Coordination, Inventory Control, Attention to Detail, Judgment

If interested in the role, call 315-299-6977 and ask for Kali! Apply at remedystaffing.com!

Remedy is partnered with a growing manufacturing company in Liverpool NY!

Job responsibility:

• Work with Team to ensure parts are clean, tidy and packed after being molded.

Hours:

• 1st 7am-3:30pm
• 2nd 3pm-11:30pm
• 3rd 11:30pm-7am

If you are interested please give the office a call at 315-299-6977 and ask for Kassidy!

Remedy is partnered with a growing manufacturing company in the Syracuse area!

Looking for a skilled Operations Coordinator! This role is stating as a part time role with the potential to go full time!

Job duties:

• File delivery/pick-up sheets; file vendor maintenance information
• Track number of cases picked, delivery shortages, and Fresh Food poundage
• Create count sheets daily for inventory, cycle counts
• Prepare all documentation for entry into Ceres and complete item adjustments
• Sort and file all completed warehouse documents
• Assist operations in the absence of the Warehouse Manager or Warehouse Associates
• Stay informed and updated on all current inventory, and assist in year-end inventory
• Provide support to both the Warehouse and Transportation departments with updating of forms and policies
• Schedule, receive and process all inbound product; maintain all appropriate paperwork for incoming and outgoing product

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Remedy is partnered with a growing company in the Rome, NY area!

Offering great benefits and great pay!

Job Duties:

• High degree of manual dexterity & eye-hand coordination are required
• Must be physically able to efficiently & independently perform job duties
• Must be detail & quality oriented and take pride in work
• Must be able to read and understand wiring diagrams, wire charts, drawings, illustrations, photographs, etc.
• Must know and understand required assembly outcome, wiring component function, assembly methods, machine/tool set-up, and procedures
• Must have the ability to plan, organize and complete work in a timely manner
• Must be able to understand and consistently meet quality standards and production goals as set by management
• Must possess a working knowledge of wire cutting and terminating equipment, proper use of wire terminals, splices, etc.
• Must be able to make decisions based on information and experience
• Be able to consistently produce defect free wires/wiring assemblies
• Must be flexible and team oriented to meet the demands of the business
• Must have basic computer skills
• Experience a plus but not required

Shift: 7am-3:30pm M-F

If you are interested in the role please give the office a call at 315-299-6977 and ask for Katie!

Remedy is partnered with a growing manufacturing company in Preble NY!

Job Duties:

• Disassemble parts from tank, send parts to assembly.
• Clean out and tag parts bucket.
• Remove arrestors, neutral strap and ground lugs.
• Disconnect HV leads and disassemble lid.
• Remove terminal tops & rods.
• Remove bushings.
• Disassemble LV Bushings.
• Remove LV leads.
• Remove LV terminal.
• Remove LV bushings.
• Disassemble Breaker/DVS/Tap changer/Magnex.
• If overload wire, remove with Needle Nose Pliers & Remove light.
• Disassemble handles from tank with all switches and slide switch into tank.
• Remove core bolts.
• Process paperwork and tag core/coil.
• Take parts bucket to assembly shelves.

Shift: 6am-4:30pm

If you are interested in the roll please give the office a call at 315-299-6977 and ask for Katie!

Remedy is partnered with a food production company in Baldwinsville New York!

Description: This is a Full-time role, Monday-Friday. Overtime is often available. Duties will include safely executing manual tasks that are required in the production and assembly of raw and cooked food products. Some positions occur directly on the production line and some are in support of the manufacturing of raw and cook production. The applicant would be trained in multiple roles, including sanitation of equipment at the end of a day.

Job Duties:

• Must follow all rules set by the company. This will include Good Manufacturing Processes (GMP) and U.S.D.A. compliance.

• Portions raw or cooked meat products quickly, accurately and efficiently using a scale.

• Places cooked or raw portioned product in the designated container.

• Packing, labeling and palletizing of packaged products.

• Following instruction and procedures.

• Willingness and ability to work and function in a team environment.

• Make boxes for production and break down for recycling.

Shift: Monday-Friday 4am-Production is over! Equals 40 hours weekly with Overtime available

If you are interested in the roll please give the office a call @ 315-299-6977 and ask for Katie!

Remedy is partnered with a growing manufacturing company in the Ithaca area! Looking for a skilled machine operator!

Job duties:

*Various openings exist in our Mill, Lathe, Grind, Polish, CNC, EDM and Weld manufacturing cell areas for qualified machine operators.

*Experience appreciated but not required.

*Set up, operation and function of machinery to perform a variety of machine operations on various metal alloy parts according to prescribed specifications in processes, layout, blueprint and/or work instructions.

*Ability to read, understand and work to process sheets and blueprints.

*Must be able to work to tight tolerances and possess a strong mathematical aptitude.

*At all times, Incorporated Code of Ethics, Safety Standards and Quality Policies while performing operational functions.

Shift: 3:30pm-12am

If you are interested in the role please give the office a call @ 315-299-6977 or apply online at remedystaff.com

Remedy is partnered with a growing manufacturing company in the Ithaca area! Looking for a skilled machine operator!

Job duties:

*Various openings exist in our Mill, Lathe, Grind, Polish, CNC, EDM and Weld manufacturing cell areas for qualified machine operators.

*Experience appreciated but not required.

*Set up, operation and function of machinery to perform a variety of machine operations on various metal alloy parts according to prescribed specifications in processes, layout, blueprint and/or work instructions.

*Ability to read, understand and work to process sheets and blueprints.

*Must be able to work to tight tolerances and possess a strong mathematical aptitude.

*At all times, Incorporated Code of Ethics, Safety Standards and Quality Policies while performing operational functions.

*Background checks also performed.

Shift: 7am-3:30pm

If you are interested in the role please give the office a call @ 315-299-6977 or apply online at remedystaff.com

Remedy is partnered with a growing manufacturing company in the East Syracuse New York area!

Summary/Objective: Produces machined parts by operating a computer numerical control (CNC) milling machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Job Responsibilities: 

• Operates a CNC milling machines at specified frequencies, uses a variety of hand inspection tools such as but not limited to micrometers, calipers, indicators etc. to compare a part dimensions with the blueprint or process and records the data on the required paperwork
• Notifies the supervisor of any operations problems promptly
• Verifies counts against the job traveler paperwork and completes all required reports and records daily
• Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)
• Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock
• Loads feed mechanism by lifting stock into position
• Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards
• Maintains specifications by observing milling operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes
• Maintains safe operations by adhering to safety procedures and regulations
• Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.

If you are interested please give the office a call at 315-299-6977 and ask for Kali! Apply at remedystaffing.com today!

Remedy is partnered with a growing manufacturing company in the Liverpool area offering great pay and great benefits looking for a Customer Service Representative!

Duties/Responsibilities:

• Develops and maintains relationships with potential and customers in the gasket, insulation, tape, and adhesive fields
• Interacts with customers via telephone, email, fax, or in person to provide support and information on products or services
• Applies knowledge of the field and product features to match products to the needs of customers
• Answers inquiries from clients concerning products, their uses, and the industry at large
• Provides information, quotes, credit terms, and other bid specifications to customers
• Facilitates the negotiation of prices, terms of sales, and/or service agreements; prepares contracts and submits orders
• Fields customer questions and complaints; when the issue is beyond the representative’s knowledge, forwards to the assigned specialist or other appropriate staff
• Ensures that appropriate actions are taken to resolve customers’ problems and concerns
• Collaborates with purchasing and production departments, managers, and other staff to confirm that orders are processed with accuracy and efficiency and that products are provided properly
• Maintains customer accounts and records of customer interactions with details of inquiries, complaints, or comments
• Maintains all customer and sales related filing
• Performs other duties as assigned

Shift: 7am-5pm

If you are interested in the role please give the office a call at 315-299-6977 or apply at remedystaff.com

Remedy is partnered with a growing manufacturing company in the Kirkville area! Offering great pay and great benefits! Looking for a skilled machine operator who is open to train to become a CNC Machine Operator!

Job duties:

• Load production machinery bar loader with raw material
• Perform tool, holder or attachment adjustments/changes as necessary to maintain part quality
• Assure parts meet customer specifications by measuring parts per inspection plan
• Enter SPC as required and properly respond to out of control conditions
• Alert QC or supervisor if there are any questions/concerns regarding part quality
• May maintain and lubricate machine tools and equipment as needed
• Complete all paperwork per proper procedures (routing card, tool change logs, count sheets etc.)
• Properly identify parts and enter production into information system
• Communicate all information needed to assure smooth shift transition with prior/next shift at all times

Prior Experience and a resume is required!

Shift: 1st 7am-3:30pm 2nd 3:30pm-12am

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!

Remedy is partnered with a growing manufacturing company in the Kirkville area! Offering great pay and great benefits! Looking for a skilled machine operator who is open to train to become a CNC Machine Operator!

Job duties:

•Load production machinery bar loader with raw material.

•Perform tool, holder or attachment adjustments/changes as necessary to maintain part quality

•Assure parts meet customer specifications by measuring parts per inspection plan. Enter SPC as required and properly respond to out of control conditions

•Alert QC or supervisor if there are any questions/concerns regarding part quality

•May maintain and lubricate machine tools and equipment as needed

•Complete all paperwork per proper procedures (routing card, tool change logs, count sheets etc.).

•Properly identify parts and enter production into information system

•Communicate all information needed to assure smooth shift transition with prior/next shift at all times

Prior Experience and a resume is required!

Shift: 1st 7am-3:30pm 2nd 3:30pm-12am

If you are interested in the role please give the office a call at 315-299-6977 or apply online at remedystaff.com!