Job Not Found

Remedy Staffing is partnered with an innovative Dental company located in Amherst in search of a First Shift Receiver. 

Position Purpose: 

• Receive incoming materials
• Load & Unload Trucks
• Process Returns
• Put product aware in the warehouse
• Will utilize SAP 

 Requirements: 

• Minimum high school diploma or equivalent required. 
• Must have warehouse experience
• Must be comfortable with computers & entering data

Shift: Monday-Friday 6:00AM-3:00PM

**This is a temporary 4-6 Month Assignment. 

Pay $14.00 Per Hour 

**APPLY NOW for immediate consideration!

Victor manufacturer looking for Machine Operators on 2nd shift. Hours are Monday - Friday 1:30pm-10pm $15hr!!

SUMMARY: Assists in the set up and assists in operating the machine to print and cut corrugated board by performing the following duties.

ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties may be assigned.
• Sets up the machine with the assistance of the operator and crew.
• Makes necessary adjustments during set up and run to insure quality work.
• Follows First Piece Sample Procedure after set up to insure production is to customer’s specifications.
• Monitors quality throughout the production run.
• Pulls samples and records data on statistical Process Control chart when appropriate.
• Completes the Quality Assurance check list sheet for each order.
• Shuts down machine and makes adjustments for quality when necessary.
• Identifies any nonconforming material discovered during the run and places a reject or hold tag on side of units. Notifies the department supervisor.
• Enters production data into computer.
• Clears machine jam ups with assistance from crew.
• Makes small mechanical repairs to equipment and reports significant and major mechanical failures to department supervisor immediately.
• Adheres to correct and proper clean up procedures as directed by department supervisor.

QUALIFICATION REQUIREMENTS:
EDUCATION: High school diploma or general education degree.
LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Read tape measure and calipers.
REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Apply now!!

Remedy Staffing is partnered with an innovative Dental company located in Amherst in search of a Part-Time Cleaner! Offering a $300 Sign On Bonus

Position Purpose: 

Associate’s main function will be to frequently sanitize all high-touch surface areas such as bathrooms, breakrooms, door handles, etc.

• Perform general housekeeping/cleaning duties in order to maintain a high level of building cleanliness.
• Wash floor and baseboards.
• Vacuum and dust offices, conference rooms, general areas and hallways.
• Clean and disinfect washrooms.
• Collect and empty trash containers daily.

 Requirements: 

• Minimum high school diploma or equivalent required. 
• Must have recent cleaning experience

Shift: Monday-Friday 4:00PM-8:00PM

Pay $14.00 Per Hour **300 Sign On Bonus

**APPLY NOW for immediate consideration!

Manufacturer in Macedon, NY is looking for a Reach Truck Operator / Material Handler to load and unload shipments. We are looking for candidates with Warehouse experience. The position is based on experience paying between $15-$18/hour.

Macedon, NY
Monday - Friday
7am - 3:30pm
Reach Truck Operator
Great company to work for!

Apply Today to get your Career Started!!

Team Leads Needed

Horseheads, NY area

$16.25/ hr  1st Shift

Job Summary: Supervise a team of associates that perform various functions. Team Leader is responsible of ensuring that all aspects of the warehouse operations function smoothly.

Required: Supervisory experience of 1 year or more

Essential Job Functions: Communicate with co-workers and direct supervision to receive instructions and coordinate activities.
Operate Forklift equipment (electric and propane)
Organize shipping and receiving activity
Order disbursement and computer experience
Review of associate timecards and make necessary adjustments
Perform associate evaluations and handle disciplinary actions
Familiar with SAP data base is helpful

APPLY NOW

Team Lead - Department Floater

Horseheads, NY area

$16.25/hr  Monday to Friday 1st shift

Job Summary: Supervise a team of associates that perform various functions. Team Leader is responsible of ensuring that all aspects of the warehouse operations function smoothly.

Required: Supervisory experience of 1 year or more

Essential Job Functions:

Communicate with co-workers and direct supervision to receive instructions and coordinate activities.

Operate Forklift equipment (electric and propane)
Organize shipping and receiving activity
Order disbursement and computer experience
Review of associate timecards and make necessary adjustments
Perform associate evaluations and handle disciplinary actions
Familiar with SAP data base is helpful

APPLY NOW

Remedy Staffing needs A Wash Line Assistant

Elmira NY area

$13.50 / hr.

Mon-Thur 7a-4:30p
Fridays 7a-11a

Must be able to work independently and multitasking and attention to detail is essential. Running up to 5 wash / dry machines at any given time. Very fast paced.

General Responsibilities but not limited to:
Washing oil off parts
Thorough inspection of parts
Loading/unloading

MUST Complete a Competency Test

APPLY NOW

Remedy Staffing is looking for Part Time Warehouse Associates in the Sayre area

Shift: 4:30pm-10pm    Mon-Fri     Pay Rate: $14.50/hour

As an order selector, you will pick pieces of merchandise into a tote or box for stores. You will be responsible for maintaining high levels of accuracy and performance to meet the needs of store orders while utilizing safe work practices. You may work in other areas or functions of the warehouse, as needed.

Responsibilities:

- Read store orders from a tablet or RF unit which will include: item locations, descriptions, and quantity needed.

- Select the needed pieces of merchandise and place them into a tote or box.

- Move totes or boxes of merchandise (up to 30-50 pounds regularly) utilizing safe lifting techniques.

- Comply with all policies and procedures of the warehouse.

APPLY NOW!

Manufacturer in Macedon, NY is looking for a Picker/Packer to pull material and pack orders for shipment. We are looking for candidates with Warehouse experience. The position is based on experience paying between $13-$14/hour.

Macedon, NY
Monday - Friday
7am - 3:30pm
Picker/Packer
Great company to work for!

Apply Today to get your Career Started!!

Grinders are needed for an established and growing Elmira, NY Manufacturer!

2nd Shift/ $14.30 Per Hour

*4x10 hour shifts

Responsibilities Include:

• Setting up, operating, or tending drilling machines to drill, bore, ream, mill, or countersink metal work in compliance with customer, company, and OSHA standards and requirements
• Starting and stopping machinery
• Drilling holes in parts, equipment, or materials
• Installing tools in spindles and mounts attachments or tools onto production equipment
• Utilizing basic gages to verify tolerances indicated by blueprints and/or sample parts
• Performing routine preventative maintenance

Qualifications:

• High school diploma, GED or vocational training.
• Combination of education, experience, and training may be substituted for these requirements.
• One (1) to two (2) years of experience using basic manufacturing tools and equipment such as grinders, drills, presses, measuring instruments, such as calipers, micrometers, or fixed or telescopic gauges, and etc.
• Working knowledge of the Manufacturing Industry
• Ability to work various schedules including nights and weekends.
• Detail oriented with excellent hand/ eye coordination.
• Basic math skills with or without a calculator.
• Ability to read and interpret documents such as blueprints, operating and maintenance instruction, and procedure

Great opportunities with a well-established, rapidly growing Elmira Manufacturer! Free Education Courses! Unlimited referral bonuses! Health, Dental and Vision Insurance Plans!

We welcome Military Members and Veterans to apply!

Remedy Staffing is looking for Warehouse Associates in the Sayre area!

Shift: 3:30pm-11pm    Mon-Fri     Pay Rate: $14.50/hour

As an order selector, you will pick pieces of merchandise into a tote or box for stores. You will be responsible for maintaining high levels of accuracy and performance to meet the needs of store orders while utilizing safe work practices. You may work in other areas or functions of the warehouse, as needed.

Responsibilities:

- Read store orders from a tablet or RF unit which will include: item locations, descriptions, and quantity needed.

- Select the needed pieces of merchandise and place them into a tote or box.

- Move totes or boxes of merchandise (up to 30-50 pounds regularly) utilizing safe lifting techniques.

- Comply with all policies and procedures of the warehouse.

Mill / Drill Operator / Elmira, NY/ $13.00  Per Hour 

Mill / Drill Operators are needed for an established and growing Manufacturer to perform duties including machine operation, grinding or inspection! 

Shifts: 1^st :      5:00am-3:30pm

*4x10 hour shifts 

 Responsibilities Include:

• Handling metal parts with precision and accuracy while inspecting for imperfections or defects 
• Selecting and setting cutting speeds, feed rates, depths of cuts, and cutting tools
• Setting up, operating, or tending drilling machines to drill, bore, ream, mill, or countersink metal work in compliance with customer, company, and OSHA standards and requirements
• Starting and stopping machinery
• Drilling holes in parts, equipment, or materials
• Installing tools in spindles and mounts attachments or tools onto production equipment
• Utilizing basic gages to verify tolerances indicated by blueprints and/or sample parts
• Performing routine preventative maintenance

Qualifications:

• High school diploma, GED or vocational training.
• Combination of education, experience, and training may be substituted for these requirements. 

• One (1) to two (2) years of experience using basic manufacturing tools and equipment such as grinders, drills, presses, measuring instruments, such as calipers, micrometers, or fixed or telescopic gauges, and etc.
• Working knowledge of the Manufacturing Industry
• Ability to work various schedules including nights and weekends. 
• Detail oriented with excellent hand/ eye coordination.
• Basic math skills with or without a calculator.
• Ability to read and interpret documents such as blueprints, operating and maintenance instruction, and procedure

Great opportunities with a well-established, rapidly growing Elmira Manufacturer! Free Education Courses! Unlimited referral bonuses! Health, Dental and Vision Insurance Plans!

We welcome Military Members and Veterans to apply!

Inspector Production Elmira, NY/ 1^st and 2nd Shifts

$12.60 Per Hour 

Inspectors are needed for an established and growing Manufacturer to perform duties including machine operation, grinding or inspection! 

Shifts:

1^st :      5:00am-3:30pm

2^nd :     3:30pm-2:00am

*4x10 hour shifts 

 Responsibilities Include:

• Countersink metal work in compliance with customer, company, and OSHA standards and requirements.
• Handling metal parts with precision and accuracy while inspecting for imperfections or defects 
• Buffs minor cosmetic blemishes and nicks from parts during “down time” for grinders
• Magnetic Particle inspects any parts staged for Magna Flux
• Performs final inspection audits and jobs
• Utilizing basic gages to verify tolerances indicated by blueprints and/or sample parts
• Performing routine preventative maintenance

Qualifications:

• High school diploma, GED or vocational training.
• Combination of education, experience, and training may be substituted for these requirements. 

• One (1) to two (2) years of experience using basic manufacturing tools and equipment such as grinders, drills, presses, measuring instruments, such as calipers, micrometers, or fixed or telescopic gauges, and etc.
• Working knowledge of the Manufacturing Industry
• Ability to work various schedules including nights and weekends. 
• Detail oriented with excellent hand/ eye coordination.
• Basic math skills with or without a calculator.
• Ability to read and interpret documents such as blueprints, operating and maintenance instruction, and procedure

Great opportunities with a well-established, rapidly growing Elmira Manufacturer! Free Education Courses! Unlimited referral bonuses! Health, Dental and Vision Insurance Plans!

We welcome Military Members and Veterans to apply!

Remedy is seeking General Labor candidates for a 1st shift opportunity in Batavia, NY!

Shift: Monday-Friday 8AM-4:30PM

Pay Rate: $14 per hour, with a $1 increase after 30 days!

General Labor Job Description:

The General Laborer is responsible for preparing items for production. These duties include masking, unmasking, sand blasting, degreasing, and polishing.  Additional duties assigned as needed.

Cleaner needed in Clifton Springs, NY and Canandaigua, NY. 1 cleaner for each location, no traveling back and forth needed. Cleaner will sweep and mop hallways and bathrooms, take out the trash and swipe down surfaces.

• Cleaner
• Clifton, NY
• Wednesday - Sunday
• 7:30am - 4pm, $13/hour

Apply Today, start tomorrow!!

Inspector Production Elmira, NY/ 1^st and 2nd Shifts

$12.60 Per Hour 

Inspectors are needed for an established and growing Manufacturer to perform duties including machine operation, grinding or inspection! 

Shifts:

1^st :      5:00am-3:30pm

2^nd :     3:30pm-2:00am

*4x10 hour shifts 

 Responsibilities Include:

• Countersink metal work in compliance with customer, company, and OSHA standards and requirements.
• Handling metal parts with precision and accuracy while inspecting for imperfections or defects 
• Buffs minor cosmetic blemishes and nicks from parts during “down time” for grinders
• Magnetic Particle inspects any parts staged for Magna Flux
• Performs final inspection audits and jobs
• Utilizing basic gages to verify tolerances indicated by blueprints and/or sample parts
• Performing routine preventative maintenance

Qualifications:

• High school diploma, GED or vocational training.
• Combination of education, experience, and training may be substituted for these requirements. 

• One (1) to two (2) years of experience using basic manufacturing tools and equipment such as grinders, drills, presses, measuring instruments, such as calipers, micrometers, or fixed or telescopic gauges, and etc.
• Working knowledge of the Manufacturing Industry
• Ability to work various schedules including nights and weekends. 
• Detail oriented with excellent hand/ eye coordination.
• Basic math skills with or without a calculator.
• Ability to read and interpret documents such as blueprints, operating and maintenance instruction, and procedure

Great opportunities with a well-established, rapidly growing Elmira Manufacturer! Free Education Courses! Unlimited referral bonuses! Health, Dental and Vision Insurance Plans!

We welcome Military Members and Veterans to apply!

Forklift Operators  

Painted Post, NY area

Monday to Friday 3:00pm to 11:00pm

$14.50 / hour

POSITION SUMMARY:
Lift Truck Operators primary function is load/unload trailers per customer specification and put product away in the warehouse. Inspection of material/product on in-bound and out-bound shipments is essential. LTO will work closely with Shift Coordinator to ensure shipments and receipts are done in accordance to all safety, company and customer guidelines.
ESSENTIAL JOB FUNCTIONS:
• Communicate with co-workers and coordinator to receive instructions and coordinate activities.
• Operate forklift equipment.
• Maintain a clean, work environment placing all items in an orderly manner per 5S values.
• Operate within the documented QMS (Quality Management System)
• Always work in a safe manner.
COMPETENCIES:
• Attention to detail
• Consistency and reliability
• Following directions
• Handling stress
• Meeting standards

Apply Now!

Remedy Staffing is looking for a Quality Manager for the Horseheads, NY area.

Monday - Friday 8:00am to 5:00pm

Responsibilities include:

Identifying the need for appropriate resources (personnel, equipment, etc.) required for inspection, providing the identified resource, and maintaining the resource to ensure continued effective inspection.

In addition you will be responsible for:

*Participate in daily production meetings when required.

*Establish and maintain control of all nonconforming product, including both customer returned product and parts rejected in-house.

*Participate in Corrective Action process as CAR "owner" or team member.

*Responsibilities include facilitating root cause analysis & creating action plans,

*Establish and maintain effective communication with customers on all customer-initiated CARs.

Requirements:

*Knowledge of SPC ISO-9001.
*Knowledge of IATF-16949 Standard.
*CQ19 Standard
*PPAP Standard
*Management experience 2years+

Apply Now!!

Forklift Operators Needed

Corning / Painted Post 

5:00a - 5:00p

POSITION SUMMARY:
Lift Truck Operators primary function is load/unload trailers per customer specification and put product away in the warehouse. Inspection of material/product on in-bound and out-bound shipments is essential. LTO will work closely with Shift Coordinator to ensure shipments and receipts are done in accordance to all safety, company and customer guidelines.
ESSENTIAL JOB FUNCTIONS:
• Communicate with co-workers and coordinator to receive instructions and coordinate activities.
• Operate forklift equipment.
• Maintain a clean, work environment placing all items in an orderly manner per 5S values.
• Operate within the documented QMS (Quality Management System)
• Always work in a safe manner.
COMPETENCIES:
• Attention to detail

• Consistency and reliability
• Following directions
• Handling stress
• Meeting standards

APPLY NOW

Remedy Staffing is looking for Part Time Warehouse Associates in the Sayre area!

Shift: 9am-2:30pm / 5hr shifts /  Mon-Fri  

As an order selector, you will pick pieces of merchandise into a tote or box for stores. You will be responsible for maintaining high levels of accuracy and performance to meet the needs of store orders while utilizing safe work practices.

Responsibilities:

- Read store orders from a tablet or RF unit which will include: item locations, descriptions, and quantity needed.

- Select the needed pieces of merchandise and place them into a tote or box.

- Move totes or boxes of merchandise (up to 30-50 pounds regularly) utilizing safe lifting techniques.

- Maintain a high level of accuracy for merchandise selected.

- Work efficiently and effectively on pick lines with 10 or more other employees.

- Maintain 100% or greater to performance standards.

- Maintain cleanliness of work zones at the end of each shift.

- Maintain regular and reliable attendance.

- Cross train in other warehouse duties, as necessary.

- Comply with all policies and procedures of the warehouse

Great opportunity to get into a local leading company in the Geneva area!

Looking for Offline Cutting Operator for a rotating/swing 12-hour shift

Pay rate: $16.00/hour

POSITION DETAILS:
• Must maintain safe work environment by consistently wearing proper PPE, performing safe work behaviors and by communicating any and all safety concerns to supervisor/shift manager
• Maintains acceptable productivity levels based on product flow, supervisor feedback and customer needs
• Must be able to measure, cut, and use of various mechanical tools accurately
• Performs other functions as needed

REQUIREMENTS:
• Must be detail-oriented and able to work independently with minimal supervision
• Able to work as a team member and stand alone; being pleasant with others and displaying a good-natured attitude through working in a cooperative manner with fellow employees
• Must have at least 6 months safe working record & reliable attendance history.

Rotational shifts: 2 days on, 2 days off, 3 days on, 2 days off. 3 days off when transitioning from nights to days / days to nights. (Per the schedule sent)

Smoke free facility: no smoking on site, but also no smoking on breaks, or in the parking lot/ personal vehicle.

On site breaks: can not leave the facility during their breaks.

Lifting requirements: need to be able to lift up to 50lbs

Apply today!!

Warehouse Associates Needed

Elmira - Horseheads - Corning - Painted Post

Monday - Friday

6:45am to 3:15pm or 7:00am to 3:30pm

General warehouse duties include but not limited to: 
Packaging, taping / strapping of boxes. A lot of standing and bending, cleaning and/or organizing color coordinated totes. Additional duties assigned as needed. 

APPLY NOW

Remedy staffing is looking for a material handler in the Geneva area!

The selected individual will partner with the Warehouse and Logistics team to perform a variety of coordinated activities that will work to build on our production, quality, and safety goals for the process line. This individual will need to be comfortable operating and troubleshooting equipment used during daily manufacturing.

WHAT YOU WILL DO IN YOUR ROLE:
• Must maintain safe work environment by consistently wearing proper PPE, performing safe work behaviors and by communicating any and all safety concerns to supervisor.
• Understands and executes job per the given work instructions or JES
• Handles, moves, and packs products and materials
• Operates equipment and mechanized devices, running, maneuvering, navigating, or driving forklifts
• Uses either control mechanisms or direct physical activity to operate machines or processes
• Inspects equipment, materials, and products to identify the cause of errors, problems, or defects
• Judge quality of product and adjusts accordingly
• Associate regularly walks throughout the shift to run quality checks, pack product, break out co-workers, and to move from task to task
• Performs other function as needed

Job skills:
• Ability to use a tape measure, air nail gun, hammer, bander, packing machines, forklift, overhead crane, micrometers, and glass cutters.
• Ability to effectively communicate information to supervisors and co-workers in a professional manner.
• Attention to detail to ensure quality product and thoroughness in completing work tasks
• May be required to lift up to 50 pounds. May also be required to lift up to 35 pounds while twisting at the waist level on a repetitive basis while packing product

• Must be detail-oriented and able to work in dependently with minimal supervision.

Rotational shifts: 2 days on, 2 days off, 3 days on, 2 days off. 3 days off when transitioning from nights to days / days to nights. (Per

Apply today!

Mill / Drill Operator / Elmira, NY/ $13.00  Per Hour 

Mill / Drill Operators are needed for an established and growing Manufacturer to perform duties including machine operation, grinding or inspection! 

Shifts: 1^st :      5:00am-3:30pm

*4x10 hour shifts 

 Responsibilities Include:

• Handling metal parts with precision and accuracy while inspecting for imperfections or defects 
• Selecting and setting cutting speeds, feed rates, depths of cuts, and cutting tools
• Setting up, operating, or tending drilling machines to drill, bore, ream, mill, or countersink metal work in compliance with customer, company, and OSHA standards and requirements
• Starting and stopping machinery
• Drilling holes in parts, equipment, or materials
• Installing tools in spindles and mounts attachments or tools onto production equipment
• Utilizing basic gages to verify tolerances indicated by blueprints and/or sample parts
• Performing routine preventative maintenance

Qualifications:

• High school diploma, GED or vocational training.
• Combination of education, experience, and training may be substituted for these requirements. 

• One (1) to two (2) years of experience using basic manufacturing tools and equipment such as grinders, drills, presses, measuring instruments, such as calipers, micrometers, or fixed or telescopic gauges, and etc.
• Working knowledge of the Manufacturing Industry
• Ability to work various schedules including nights and weekends. 
• Detail oriented with excellent hand/ eye coordination.
• Basic math skills with or without a calculator.
• Ability to read and interpret documents such as blueprints, operating and maintenance instruction, and procedure

Great opportunities with a well-established, rapidly growing Elmira Manufacturer! Free Education Courses! Unlimited referral bonuses! Health, Dental and Vision Insurance Plans!

We welcome Military Members and Veterans to apply!

Remedy staffing is looking for a forklift / material handler in the Geneva Area.

Pay rate: $16-16.75/hour

Hours M-F 7:00 am-3:30 pm

Duties include:

Warehouse / forklift operation

Milk Run:
• Keeping an inventory of all supplies (dunnage strips, styrene, plastic, cardboard) entering or exiting the warehouse.
• Safely transporting and replenishing department carts that are low on supplies (dunnage, styrene, plastic, cardboard)

Offload / Strip Racks:
• Scanning and offloading incoming racks off van trailers.
• Safely transporting racks to the right destination (warehouse and/or rack pad)
• Maintaining organization of different sized racks outside in the rack yard and/or inside the plant.
• Ensuring all racks are stripped, cleaned off, appropriately labeled and ready to be packed on.
• Identify any missing, lost, or damaged racks and immediately notify the supervisor.

Offload and Empty Cullet Tubs:
• Keeping an inventory of all cullet tubs.
• Periodically check cullet return area for tubs of glass that need to be dumped.
• Scan and receive in cullet tubs and record ID labels.
• Safely breakdown and stack empty cullet tubs.

Rack Prep:
• Read and understand production schedules.
• Be able to plan ahead for upcoming production runs.
• Supply various departments with prepared racks to meet their production schedules.

General Duties:
• Maintain a clean and safe work environment.
• Safely operate forklift, floor sweeper and rotator.
• Periodic checks on trash bins and de-dust units. (empty when full)

Rotational shifts: 2 days on, 2 days off, 3 days on, 2 days off. 3 days off when transitioning from nights to days / days to nights. (Per the schedule sent)

Smoke free facility: no smoking on site, but also no smoking on breaks, or in the parking lot/ personal vehicle.

On site breaks: can not leave the facility during their breaks.

Lifting requirements: need to be able to lift up to 50lbs

Apply today!!

Customer Service Representative Needed

Monday - Thursday 7:00a - 4:00p  Friday 7:00a - 11:00a

Roles & Responsibilities:

• Process all customer orders; review pricing and order quantities to approved quotes; review due dates to make sure that they are within our lead-time; confirm all information on customer order such as terms, bill to/ship to address, rev levels, and other important information.
• Send order acknowledgements to customers
• Access Customer Portals for new/change orders
• Handle communication between customer and company
• Work with production to establish delivery dates
• Account Receivable - post incoming cash / contact customer for payment
• Process all invoicing and credit memos; work with quality on customer returns/rejections
• Sort and distribute incoming mail, answer e-mails, faxes, file papers and reports
• Assist Office/Sales Manager with quotes
• Back up for Purchasing/Planning
• Answer Operator incoming telephone calls
• Other tasks as required

Requirements:

• High School Diploma or High School Equivalency Diploma
• Proficient with Microsoft Office

APPLY NOW

 Welders Needed

 Elmira, NY area

The Welder position is responsible for the programming, set-up and operation of a robotic welder, Bancroft welder, and related equipment to perform cutting and welding functions. 

Principle Responsibilities/ Accountabilities
• Handles metal parts with precision and accuracy while inspecting for imperfections or defects.
• Wears personal protective equipment as required by company policy and OSHA standards.
• Sets-up and operates automatic welding machine to weld together parts of fabricated metal products.
• Sets-up and operates Bancroft automatic weld around.
• Makes program changes to equipment as authorized by Engineering.
• Visually examines welds for adherence to blueprints, layouts, and welding procedures.
• Takes appropriate setup and in process inspection pieces to the lab for weld verification.
• Uses hand tools and hand welder for purposes of finishing designated operation.
• Performs required inspection duties to ensure parts conform to specifications.
• Watches operating equipment to detect any malfunctions.
• Maintains records and histories.
• Maintains the cleanliness and housekeeping responsibilities for the equipment and work area.
• Performs any other reasonable assignment of duties relative to this position.
• Responsible for cleanliness and housekeeping of work area.
• Performs routine preventative maintenance, as necessary.
• Performs other duties/ tasks as directed by supervision or management.

Apply Now

HR Generalist / Recruiter Needed

Corning / Painted Post Area

Monday - Friday 8:00a - 4:30p

$17.00/hr

The HR Recruiter/Trainer is responsible for prospective associate recruitment in positions serving all areas of the organization. This will be achieved through the development of recruiting plans, employing traditional sourcing strategies and resources as well as developing new, creative recruiting ideas.

ESSENTIAL JOB FUNCTIONS:
• Establishes recruiting requirements by studying organizations plans and objectives, meeting with managers to discuss needs.
• Attracts applicants by posting on company website, job boards and advertisements.
• Determines applicant qualifications by interviewing, analyzing responses and verifying references.
• Arranges management interviews by coordinating schedules.
• Coordinating new hire paperwork, background screening and drug testing.
• Complete new hire onboarding, first day of hire training and paperwork.
• Improves organization attractiveness by recommending new policies and procedures, monitoring job offers and compensation practices, emphasizing benefits and perks.
• Manage intern program by conducing orientations, scheduling assignments, monitoring, and coaching intern and advising managers on training and coaching.
• Avoids legal challenges by understanding current legislation; enforcing regulations with managers; recommending new procedures, conducting training.
• Assess training needs for new and existing associates.
• Identify internal and external training programs to address gaps.
• Organize, develop and source training programs to meet specific training needs.
• Facilitate learning through a variety of delivery methods including classroom instruction, virtual training, on-the-job coaching.
• Maintain associate training records.
• Perform other duties as assigned.

APPLY NOW

Remedy Staffing is looking for Warehouse Associates in the Sayre area

Shift: 6am-2pm    Mon-Fri     Pay Rate: $14.00/hour

As an order selector, you will pick pieces of merchandise into a tote or box for stores. You will be responsible for maintaining high levels of accuracy and performance to meet the needs of store orders while utilizing safe work practices. You may work in other areas or functions of the warehouse, as needed.

Responsibilities:

- Read store orders from a tablet or RF unit which will include: item locations, descriptions, and quantity needed.

- Select the needed pieces of merchandise and place them into a tote or box.

- Move totes or boxes of merchandise (up to 30-50 pounds regularly) utilizing safe lifting techniques.

- Comply with all policies and procedures of the warehouse.

Harlequin Distribution Center in Depew, NY is partnering with Remedy Staffing to hire multiple candidates for a short term project that could turn into a long term opportunity with good attendance and performance!!

This is an excellent opportunity to get your foot in the door with Harlequin Distribution center.

Shift is 5:30am-2pm with overtime at 4am before the shift and 4am-10am on Saturday as needed.

Compensation: $13.50

These positions requires flexibility to work individually or on a team in a fast-paced work environment.

Responsibilities may include unpacking books and stacking them on an open pallet along with the reverse- taking books from an open pallet and packing them into cartons. 

Must be comfortable lifting up to 20lbs.

It is important that candidates are willing to work collaboratively as a member of a team and promote a positive work environment.

 If you are looking to make a switch to manufacturing this is the position for you!

Apply today and start ASAP!

 Material Handlers Needed

Binghamton NY area

1st Shift 6:30am-5pm / $16.00/hour

Material Handler:

• Unload, load, stage, and warehouse cartons and large bulky objects
• Use safe and secure material handling methods to maximize use of trailer space and distribute merchandise properly according to our standards
• Verify purchase orders, location numbers, case pack quantities, and other information prior to receiving, picking or loading merchandise
• Quality Assurance including responsibility for chargebacks and capturing vendor errors
• Complete required documentation neatly and accurately
• Perform spot-checks of system to ensure merchandise is sorted properly
• Operate manual and mechanical equipment in a safe manner

Skills requirements for all positions:
• Ability to stand, bend, reach above head, climb stairs, stoop, push, and repetitively lift cartons weighing up to 50 pounds
• Basic manual dexterity
• Basic reading comprehension and numerical reasoning skills.
• Ability to keep pace with production standards
• Ability to use RF device, gladiator, computer, and tape gun

APPLY NOW!!!

Our Dedicated Recruiters are EXCITED to help you find a new career in Manufacturing! Military and Veterans ALWAYS encouraged to apply!!

Harlequin Distribution Center in Depew, NY is partnering with Remedy Staffing to hire for an order filler!

This is an excellent opportunity to start a long-term career with Harlequin Distribution center.

Shift is 6:30am-3:00pm Monday- Friday with possible overtime before shift at 4:30am and on Saturdays 4:30am-10:30am.

Compensation: $13.50

These positions requires flexibility to work individually or on a team in a fast-paced work environment utilizing technology.

Responsibilities include palletizing small packages and production line order fulfillment work.

It is important that candidates are willing to work collaboratively as a member of a team and promote a positive work environment.

Previous work experience in a fast-paced manufacturing environment is preferred but not required. If you are looking to make a switch to manufacturing this is the position for you!

Apply today for this excellent opportunity with a growing distribution center for books in WNY!

Harlequin Distribution Center in Depew, NY is partnering with Remedy staffing to hire multiple long-term order fillers!!

This is an excellent opportunity to start a long-term career with Harlequin Distribution center.

Set weekly schedule: 1st shift: 5:20am-2pm Monday- Friday with possible overtime before the shift at 4am and on Saturdays 4am-10am.

Compensation: $13.50

This position requires flexibility to work individually or on a team in a fast-paced work environment utilizing technology.

Responsibilities include:

• Uses voice-pick or touch screen technology to pick specific quantities, by location, into designated cartons or totes. 
• Assembles carton packs, pre-packs or displays to provide customers with pre-packaged bundles.
• Works on high-speed collator equipment as member of team.
• Assembles, labels and inducts cartons onto automated conveyor system that directs cartons to designated picking zones.
• Uses computer dashboard screen to maintain carton flow and order priority on line.
• Packs-out orders that were bulk picked into totes by using computer screen to verify contents for each carton.
• Follows standard operating procedures as instructed and adopts practices and behaviors that achieve efficiency and productivity rates.
• Adheres to quality specifications within each Order Filler assignment and performs prescribed quality checks as instructed.
• Completes required paperwork and reporting including, but not limited to, setup sheets, performance tracking boards, etc.
• Performs marginal tasks as needed.

It is important that candidates are willing to work collaboratively as a member of a team and promote a positive work environment

Previous work experience in a fast-paced manufacturing environment is preferred but not required! Fast-food experience is a great building block for these positions. If you are looking to make a switch from fast-food to manufacturing this is the position for you!

Apply today for the excellent opportunity as an order selector with a growing distribution center in WNY!

Remedy is excited to partner with a Well-Established 100% EMPLOYEE OWNED COMPANY as they search for a much needed WELDER FABRICATOR to join their tight-knit team. This Welder will be a jack-of-all trades, supporting, Welding, Assembly and Fabrication on custom designed products with this Growing Manufacturer in Silver Creek, NY. Check out these great details!

Pay: $15-16 (Starting Pay) 

Hours: 8am - 4:30pm, Monday through Friday

Work Perks:

• Competitive pay based off of experience
• Medical benefits (medical, dental & vision plans)
• On the job training with EXPERTS in Welding & Fabrication
• The backing/support of a large company with a small, family company feel
• 100% EMPLOYEE OWNED COMPANY

Here are some essential duties of the Welder Fabricator:

• Work from shop orders, specifications, prints and instructions.
• Receive and process raw materials or in-process parts through any range of operations to suit product specifications.
• Set up, change over and operate the complete range of equipment, machine tools.
• Position processed material on designated cart system and move to succeeding operations as required to facilitate production flow.
• Perform visual and dimensional check of work to verify parts are to specification.
• Blue print reading, understand basic math, including decimal, fraction and angle dimensions.

TOOLS AND EQUIPMENT USED:

• Saws, Drills/Mills, Brake Press, Measuring equipment (tape measures, Calipers), Hydraulic Sheet Metal Shear, Overhead Crane

MINIMUM REQUIREMENTS: 

• Must be able to operate basic fabrication equipment such as Mills, brake press and saw.
• Use measuring equipment to hold specific tolerances.
• Must be able to read blueprint information for layout work to complete tasks on specific machines.

This is a AMAZING opportunity to join a great team with excellent potential for your career growth. They are open to skilled professionals on all levels and are willing to train if you're just getting your career started! Apply today for additional info and immediate consideration! 

Active Military and Veterans are always encouraged to APPLY!

Remedy Staffing is partnered with a manufacture in Amherst in need of assemblers!

1st Shift 630am- 3pm

Pay-15 dollars an hour

• Performs pre-quality control checks on sub-assemblies to ensure proper fittings.
• Uses raw materials to build sub-assemblies for various products (Drilling, tubing, soldering, wiring, etc.)
• Performs final assembly of product.
• Cleans units.
• Fills sieve beds as needed for various products.
• Attach labels properly to all products.
• Tests completed units for leaks and proper wiring.
• Pulls parts from warehouse for various jobs.
• Record keeping and documentation.
• Maintains parts inventory.
• Maintains reference books and drawings.
• Informs supervisor when there are material problems like discrepant material or low inventory.
  
  

*** Please apply now for immediate consideration***

Remedy Staffing is partnered with Food Manufacture in Cheektowaga  in need of a sanitation worker.

Pay -14.30

Shift 11pm-730am 

Sanitation:

• Responsible for the daily cleaning and sanitation of all production equipment and processing areas.
• This is a HEAVY DUTY position that will involve regular lifting up to 50 lbs.
• Notify supervisor of any mechanical or material issues
• Responsible for food safety.
• Perform other related duties and assignments as required

*** Please apply now for immediate consideration *** 

Remedy Staffing is partnered with a food Manufacture in Cheektowaga. In need of 2nd  shift packagers.

Pay - 13.75 an hour

Shift - 4pm-1230am  or 3pm- 1130pm 

Job Duties

• Lines and pads crates and assembles cartons; obtains and sorts product.
• Wraps protective material around product.
• Could start, stop, and regulate speed of conveyor.
• Labels and identifies products as instructed; sorts bundles or fills containers.
• Packs to established special arrangements or selections of product.
• Inspects materials, products, codes and containers at each step of packaging process.
• Records information such as weight, time, and date packaged.                                                

  **** Apply now for immediate consideration **** 

Remedy Staffing is partnered with a food Manufacture in Cheektowaga. In need of1st shift packagers.

Pay - 13.25 an hour

Shift - 7am - 330pm

Job Duties

• Lines and pads crates and assembles cartons; obtains and sorts product.
• Wraps protective material around product.
• Could start, stop, and regulate speed of conveyor.
• Labels and identifies products as instructed; sorts bundles or fills containers.
• Packs to established special arrangements or selections of product.
• Inspects materials, products, codes and containers at each step of packaging process.
• Records information such as weight, time, and date packaged.                                                

  **** Apply now for immediate consideration **** 

Remedy staffing is partnered with manufacture in Amherst in need of CNC machinist!

Shift - 230pm-11pm

Pay 16-22  based on experience 

Job duties:

• Operating/adjusting/setting up CNC cutting laser and CNC counter cutter
• Changing tooling
• Inspections of die board, tooling, materials,
• ArtiosCAD
• Measuring materials using magnifying loops, calipers, microscopes, depth gages, thickness gages, tape measures, Accu-gage and hardness testers.

***  Apply now for immediate consideration *** 

Remedy Staffing is partnered with a manufacture in Tonawanda in need of a warehouse associate!

Pay - 16 dollars an hour

Shift 7am  - 430pm

Duties and Responsibilities:

• Maintains a safe, clean and organized work area.
• Organize warehouse inventory.
• Facilitates the movement of products throughout the warehouse including storage and shipment of finished products.
• Handles daily flow of finished products.
• Confirms availability of items to be shipped by verifying inventory records or conducting inventories of required items.
• Manually handles, repacks, or restacks pallets of finished product as needed.
• Operates forklift truck as needed.

****Please apply now for immediate consideration*** 

New 1st Shift General Labor Role in Cheektowaga NY!

Temp to Hire!

Pay 13.50/HR

Bus Accessible! 

Job Description:

• Operate CNC Mill and turning lathes - Production volumes
• Willing to train motivated and positive attitude candidates
• Perform related labor as required to clean up, set up, and organize. Return the dies and materials to the proper location.
• Responsible to ensure that all safety and quality start-up procedures are followed.
• Responsible to perform all required quality checks utilizing gauges and other measuring devices.
• Responsible to accurately report production in electronic reporting system.
• Responsible to communicate with team members (Supervisor, Quality, Co-workers) on any issues with the machines. Have an understanding of what the cause of the issue is and which team member to inform. (Maintenance, Quality)

New 1st Utility Shop Associate needed in Downtown Buffalo!

Temp to Hire!

Pay is $17.00/HR!

Responsibilities of Shop Utility Person:

• Saw cutting – Straight and miter cuts on aluminum material.
• Fabrication – Use small presses, benders, manual lathes, manual mills, drill presses, pem machines and hand tools.
• Finish operations – Deburring, brushing, polishing, washing and packing of parts.
• CNC – Helper / Operator / will possibly train on setups.

Now hiring in the Rochester area!
-Entry level
-A shift position 5am-3:30pm
-Schedule is Monday through Thursday
-Must have reliable transportation
-Position includes sealing and capping of plastic bags
-Steel toed boots or sneakers required
-Can NOT have nail polish, fake nails, or wear jewelry

Now hiring in the Rochester area!
-Entry level
-B shift position 3:15pm-1:45am
-Schedule is Monday through Thursday
-Must have reliable transportation
-Position includes sealing and capping of plastic bags
-Steel toed boots or sneakers required
-Can NOT have nail polish, fake nails, or wear jewelry

Local Orchard Park manufacturing looking for Welders! 

Temp to hire position

Shift: 7a-3:30pm

Payrate: $17-$18/hr 

Requirements: 

• 1 year of mig and tig welding experience 
• Team player
• Positive attitude 

Great company to work for with hardly ever any openings! Don't miss out on this opportunity apply today! 

A reputable company in Angola NY is looking for a reliable 1st shift Order Picker 

Pick in Zones as directed and use assigned tools and equipment as instructed. The ideal candidate has the following experience/skills:

-Previous Forklift Experience (with certification is preferred)
-Previous Warehouse Experience
-Can lift and carry up to 50 pounds
-Computer Experience
-High School Diploma/GED

Apply today!

Entry Level willing to train! 

Manufacturing company in Orchard Park, NY is looking for Injection Mold Machine Operators for 3rd shift. 

Shift: 

1st- 8a-4p M-F $14.75

2nd- 4p-12a $16.50

3^rd:  12a-8a M-F $16.50

Responsibilities:

• Production including trimming flash, sorting, and sub-assembly
• Inspection
• Packaging acceptable product per work instructions
• Checking material to make sure it matches the description on the production card and Inspection Planning Sheet.

Requirements:

• Previous Machine Operation experience
• Production experience 

Great benefits!! Ultra clean facility!! Great opportunities with a growing Orchard Park Manufacturer! Apply today!

We welcome Active Military Members and Veterans to apply!

Start your career with Electronic Assembly! 

A local Orchard Park manufacturer is seeking to add a 1st shift assembler to their team.

Entry level manufacturing candidates with reliable work history are encourages to apply!

Shift: Monday-Friday 7a-3:30pm

Pay Rate: $15-18 pending experience

Job Duties: 

• Small scale assembly of a wide variety of plastic and electrical components.
• Soldering
• Meet all quality standards while following all safety requirements
• Meet or exceed all rework goals set on a yearly basis
• work productively and cooperatively in a team environment
• Complete any reporting processes as necessary

This company is looking for friendly candidates who enjoys a team friendly environment! 

Apply with Remedy Staffing today for this temp-to-hire opportunity!

Are you familiar with CNC Routers and have a woodworking background?

A company in North Java NY is looking for an experienced CNC/woodworker! 

Shift: Monday-Friday 6:00am-2:30pm 

Payrate: $18-$20/hr pending experience 

In this position you will accurately program and machine custom parts. Cut MDF panels for edge-banded veneer. 

Duties: 

• Responsible for quality of product 
• Responsible for preventative maintenance when assigned by department leader. 
• Work overtime when required to meet customer delivery. 
• Work in a safe manner and keep work area clean. 
•  Able to operate required equipment. 

Skills: 

• Advance knowledge of wood characteristics
• Read an interpret shop drawings 
• Knowledge of AutoCad
• Advance knowledge of door construction 
• Understanding G code
• Generate CSV file 
• Edit CSV file 
• Create new order in APM 
• Edit APM Parameters per door unit
• Run APM order
• Generate NC files 
• Output DXF files 
• Program Panels 
• Retrieve Dimensions from CAD drawings

Requirements: 

• High School Diploma or GED 
• Computer experience 
• Assembly experience: shaping, assembly, prehang functions
• Experience with: AutoCAD and AlphaCam or equivalent is a plus
• Progression to CNC Programmer from CNC operator 
• Progression to CNC Programmer from Drafter

Great opportunity to build a long term career! Apply today! 

Military and Veterans encouraged to apply!