Important W-2 Information Click here to read more.

close

This job is no longer available, but here are some other jobs:

1st Shift

Syracuse NY

Base Pay: 15.00 per HOUR

Summary: Under general supervision, Lift Truck Operator (LTO), Warehouse Worker will ensure safe and accu receipt, storage, and shipment of food pr...

Summary: Under general supervision, Lift Truck Operator (LTO), Warehouse Worker will ensure safe and accu receipt, storage, and shipment of food products utilizing equipment including, but not limited to sit d and stand up forklifts, stand up straddle trucks, walk behinds, pallet jacks, double pallet jacks and ra frequency equipment. Essential Functions: • Load and unload freight using equipment in an efficient and safe manner. • Move product to storage areas with proper equipment. • Efficiently stack and store the merchandise in the appropriate area. • Pick orders for shipment and assemble various types of merchandise to be shipped. • Check or count freight for accuracy and/or damage and infestation. • Assist in maintaining the security of the warehouse. • Conduct operations in a manner, which promotes safety. • Participate in physical inventories, as needed. • Perform labeling, sorting, wrapping, packing, and repacking. • Operate equipment safely and efficiently. Equipment to include (but not limited to) stand up fork stand up straddle trucks, walk behinds, pallet jacks, double pallet jacks and radio frequency equipment. • Report all safety malfunctions on equipment. • Comply with OSHA standards. • Must be able to meet production standards. • Maintain a clean, neat, and orderly work environment. • Follow attendance policy, show up for work on time and ready to work assigned shift. • Must be able to meet production standards. • Charge or charge forklift battery as needed. • Perform other duties as assigned, may be required to perform duties outside of their normal responsibilities from time to time, as needed. Tools and Technology: • Computer • Warehouse management system and related components • Pallet Jack, high lift, sit down or stand up lift truck, Hi-lift, RC

Apply Now More Info

Warehouse Receiver

East Syracuse NY

Base Pay: 13.00 per HOUR

1. Daily Job Functions a. Receiving responsibility - Assist in the unloading of all trucks - Move flow through transfers for other branches to the...

1. Daily Job Functions a. Receiving responsibility - Assist in the unloading of all trucks - Move flow through transfers for other branches to the appropriate holding area - Verify inbound product is correct and receive into SHIMS - Replenish product into correct locations as quickly as possible - When applicable, rotate stock for FIFO. This includes Liberty, American Standard furnaces and AC units, water heaters and all items that require the recording of serial numbers. - Communicate with shipping supervisor when branch transfers have been received. - Review new items with supervisor to insure location knowledge and accuracy. - Monitor water and replenish as needed in all electrical equipment batteries. b. Receiving process - Verify quantity and product is correct - Inspect product for damage and or defect. Note all discrepancies accordingly on the bill of lading and document on the Receiving Discrepancy Report. - Process into the system and turn paperwork into receiving office for scanning. - When quantity is incorrect receiver must receive only quantity that was shipped and notate on product line on the right hand side of paperwork. - When item is shipped incorrectly receiver must zero receive the item, write the correct part number and quantity on the pick ticket and receive into the system. - Replenish primary location first then secondary location with all labels or part numbers exposed. c. Receiving Discrepancy - When a branch ships the incorrect product on a transfer it is the receiver’s responsibility to notify the sending branch of the mistake. - Receiver must also notify the transfer writer of the mistake so that the correct product can be reordered. 2. Safety Compliance - Participate in the Company’s Safety Program as deemed necessary - Reports or corrects unsafe working conditions; makes recommendations and/or improves safety and security procedures. Enforces safety regulations and procedures. - Attends and/or conducts Monthly

Apply Now More Info

1st Shift

Syracuse NY

Base Pay: 15.00 per HOUR

Warehouse work, moving materials around warehouse, stocking. Must be able to lift up to 40lbs. Work with pallets of products and prep them to be sh...

Warehouse work, moving materials around warehouse, stocking. Must be able to lift up to 40lbs. Work with pallets of products and prep them to be shipped.

Apply Now More Info

551 Forklift

Lowville NY

Base Pay: 14.00 per HOUR

Load and unload freight using equipment in an efficient and safe manner. • Move product to storage areas with proper equipment. • Efficie...

Load and unload freight using equipment in an efficient and safe manner. • Move product to storage areas with proper equipment. • Efficiently stack and store the merchandise in the appropriate area.

Apply Now More Info

1st Shift

East Syracuse NY

Base Pay: 13.00 per HOUR

Summary/Objective: Finishes molded parts to customer specifications. Job Responsibilities • Mix filler and hardener per instructions. • I...

Summary/Objective: Finishes molded parts to customer specifications. Job Responsibilities • Mix filler and hardener per instructions. • Inspect parts and fill voids. • Using sandpaper, straight drill, and sander, finish parts per job instructions. • Verify counts, scan job traveler, and route to the next location. • Meet quality and quantity standards for the position. • Proactively supports the ISO process approach to quality management and the Syteline MIS system • Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. • Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping. • Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct. • Performs other tasks as directed including deburring parts and performing other operations during cycle. Educational, Experience Based, and Skill Qualifications • High school graduate or equivalent with manual dexterity. 6 months experience in a surface finishing function preferable. • Ability to read job travelers/job specification. • Strong attention to detail. • Conceptual Skills, Process Improvement, Verbal Communication, Coordination, Attention to Detail, Judgment Physical Requirements Ability to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to an including 35 pounds as needed.

Apply Now More Info

2nd Shift

East Syracuse NY

Base Pay: 14.50 per HOUR

General Warehouse Folder, Gluers, Feeders, Etc. Shifts: 5am-130pm and 130pm-1230am. Pay: 14 for 1st, 14.50 for 2nd. Required: Steel toes, no hoodie...

General Warehouse Folder, Gluers, Feeders, Etc. Shifts: 5am-130pm and 130pm-1230am. Pay: 14 for 1st, 14.50 for 2nd. Required: Steel toes, no hoodies, loose clothing. If associate is hired on, they can get a $50 reimbursement for steel toes from BCI if they keep receipt.

Apply Now More Info

Shipping

LOCKPORT NY

Base Pay: 18.50 per HOUR

Remedy Staffing is partnered with Manufacture in Lockport in need of a Shipping and receiving clerk! Shift is 7am- 3pm Pay is 18.50 an hour  ...

Remedy Staffing is partnered with Manufacture in Lockport in need of a Shipping and receiving clerk!

Shift is 7am- 3pm

Pay is 18.50 an hour

 

Job Duties

  • Manage inbound and outbound shipments
  • Ability to lift up to 50 lbs
  • Receiving, storage and loading of product and materials, housekeeping and various miscellaneous types of work necessary to support operations of the plant
  • Must have Forklift experience Coordinating all outgoing shipments with Trafficking and entering all shipment data online.
  • Process incoming shipments by receiving in-bound product into the production system
  • Create and distribute production batches
  • Learn formulation and act as a backup for the Raw Material Coordinator
  • Enter and verify raw material lot receivers
  • Tag raw material  lots in the Raw Material Department
  • Assist with annual Physical Inventory
  • Participate in the ATI Continuous Improvement initiatives by performing Process Audits and participating in Standard Work events

 

**** Please apply now for immediate consideration****

Apply Now More Info

Forklift Operator - 1st shift

Bergen NY

Base Pay: 14.00 per HOUR

Remedy is seeking qualified 2nd shift Forklift Operators for a manufacturing facility, located in Bergen, NY! Shift: Monday-Friday 7...

Remedy is seeking qualified 2nd shift Forklift Operators for a manufacturing facility, located in Bergen, NY!

Shift: Monday-Friday 7:00am-3:30pm Overtime is MANDATORY when needed!

Pay Rate: $14.00 hourly plus additional hazard pay. 

Forklift Operator Job Description:

  • Operate indoor and outdoor forklifts
  • Load and unload material from incoming vehicles
  • Relocate incoming materials to proper departments
  • Locate and move product to pallets or crates for storage or shipment
  • Properly identify damages and report shortages or quality deficiencies

Apply today for this great opportunity! 

Apply Now More Info

1st Shift

Syracuse NY

Base Pay: 13.00 per HOUR

Job Summary: Responsible for performing all required operating procedures and running production equipment for one packaging as well as one palleti...

Job Summary: Responsible for performing all required operating procedures and running production equipment for one packaging as well as one palletizing equipment. Essential Duties and Responsibilities: · Set up, operate and clean all assigned equipment in accordance with standard operating procedures. · Ensure caser coders, sealers, conveyer controls and robot/palletizer are operating correctly and troubleshoot when errors arise. · Clear any jam-ups and restore production line operation. · Troubleshoot equipment in accordance with established procedures. · As required, set up, operate and clean the following equipment: python, repro-tank, bundler, bailer, trash compactor and foamer, while completing all required documentation. · Maintain sanitation and cleanliness of immediate area. Use personal protective equipment when handling chemicals. · Monitor your assigned equipment for quality of production. Notify Shift Manager or designate of problems · Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintain SQF readiness, and HACCP.

Apply Now More Info

Machine Operator

Rochester NY

Base Pay: 13.50 per HOUR

Immediate Openings! Machine operator shifts openings in Gates! Must have reliable transportation. Machine operation in a company that produces and...

Immediate Openings!

Machine operator shifts openings in Gates!

Must have reliable transportation. Machine operation in a company that produces and manufacturers small car parts. You will be operating a machine that presses and shapes plastic. Safety Glasses and gloves are required.

Apply Now More Info

Shipping and Receiving

ROCHESTER NY

Base Pay: 14.30 per HOUR

Northern Soy is looking for a motivated person to join our team and grow a lasting and meaningful career with us. The current opportunity is for a...

Northern Soy is looking for a motivated person to join our team and grow a lasting and meaningful career with us.

The current opportunity is for a Packaging Assistant who will rotate daily through a series of jobs that includes packing, boxing, and stacking a variety of organic food products.

The job is a temp-to-hire with 6-month probation period. Upon permanent placement, this entry-level position offers exceptional benefits and opportunity for advancement.

Apply Now More Info

Material Handler

Rochester NY

Base Pay: 14.00 per HOUR

Packaging and assembly of Barilla Pasta items Working in a fast paced enthronement to repack/ shrink wrap bulk pasta for wholesale retailers Fold,...

Packaging and assembly of Barilla Pasta items

Working in a fast paced enthronement to repack/ shrink wrap bulk pasta for wholesale retailers

Fold, glue, package, and palatize materials

All associates need to be available to work 6:30am-5:00pm Monday - Saturday.

Apply Now More Info

Accountant

TONAWANDA NY

Base Pay: Pay Commensurate with Experience

  Accountant/ Tonawanda, NY   Remedy is partnered with a rapidly growing, international Tonawanda Manufacturer to identify an Accountant...

 

Accountant/ Tonawanda, NY

 

Remedy is partnered with a rapidly growing, international Tonawanda Manufacturer to identify an Accountant to  join their team!

 

Accountant Responsibilities:

  • Maintaining financial reports, records and general ledger accounts
  • Preparing journal entries, analyses and account reconciliations and assist with monthly close
  • Assisting with the preparation of the annual budget and quarterly forecasts
  • Performing monthly balance sheet reconciliations and schedules
  • Responding to information requests and adhoc reporting
  • Assisting with audits (external, internal and financial)
  • Assisting the Assistant Controller as necessary

 

Accountant Requirements

  • Bachelor degree in accounting required
  • Proficiency with Microsoft Office (Excel, Access, Power BI)
  • 1-5 years of accounting experience
  • General Ledger experience
  • Excellent verbal and written communications skills
  • Working knowledge of GAAP preferred
  • Strong problem solving and time management skills
  • Highly organized and detail oriented

 

Great opportunity with an established , international Tonawanda Manufacturer! Apply now!

 

We welcome active Military Members and Veterans to apply!

Apply Now More Info

Maintenance Assistant

TONAWANDA NY

Base Pay: $17.00 Per Hour

Set Up Technician (Maintenance Assistant) /Tonawanda, NY/ 2nd Shift   A Set Up Technician is needed for a rapidly growing, international...

Set Up Technician (Maintenance Assistant) /Tonawanda, NY/ 2nd Shift

 

A Set Up Technician is needed for a rapidly growing, international Tonawanda, NY Manufacturer to join their team!

 

Shift: 

1st: 3:00pm – 11:30pm

 

Set Up Technician Responsibilities:

  • Performing machine set ups for work orders and adjusting machines as needed for work orders.
  • Acting as a liaison between the Machine Operator and Maintenance Mechanic.
  • Handling additional job related duties as needed.

 

Set Up Technician Requirements:

  • Previous machine set-up experience highly preferred
  • Strong mechanical skills

 

Great opportunity with an established and rapidly growing Tonawanda Manufacturer! Clean work environment! Growth opportunities available!  Apply today!

 

 We welcome Military Members and Veterans to apply!

Apply Now More Info

Machine Operators

TONAWANDA NY

Base Pay: $16.00- $18.00 Per Hour

Machine Operators (Batchers) / Tonawanda, NY/ 2nd and 3rd Shifts Remedy is partnered with a  rapidly growing Tonawanda, NY Manufacturer to loc...

Machine Operators (Batchers) / Tonawanda, NY/ 2nd and 3rd Shifts

Remedy is partnered with a  rapidly growing Tonawanda, NY Manufacturer to locate Batchers to prepare bulk and raw materials for production, to assemble, maintain and purge all mixing equipment and transfer lines in accordance with GMP’s and SOP’s!

 

 

Shifts:

2nd:  3:00PM – 11:30PM  Monday - Friday

3rd:  6:00PM – 6:30AM  - Rotating 12 hour shift

 

 

 Responsibilities:

  • Accumulating and preparing raw material for compounding.
  • Mixing raw materials for product batches, verifies the material components, item codes, lot numbers and weights.
  • Documenting all required processing information
  • Working in conjunction with packaging personnel to transfer bulk product from the compounding area to the packaging line.
  • Assembling and disassembling transfer lines, trace lines, insulated jackets and pumps as needed.
  • Cleaning all equipment components to remove residue to ensure all batches meet quality control standards and potential batch contamination is prevented.
  • Transporting raw materials to and from warehouse to compounding area.
  • Properly disposing of compounding waste, packaging and other bulk scrap.
  • Maintaining a clean, orderly and safe work area
  • Performing additional job related tasks as needed

Qualifications:

  • Previous batching experience in a manufacturing setting preferred but not required
  • Experience with Human Machine Interface (HMI) ,Batch Programming and Control Schemes in C++ a plus!
  • Rockwell RS Batch and RS View software for computer controlled operations preferred but not required
  • Automated raw material delivery systems experience a plus!
  • Experience with Steam, Condensate, Chilled Water, Compressed air utility functions and installations preferred but not required
  • Any experience in performing or participating in new equipment installations, validations and startups is a plus!

 

Great opportunities with an established, international manufacturer! Growth opportunities available!! Clean work environment!  Apply today for immediate consideration!

We welcome active Military Members and Veterans to apply!

 

Apply Now More Info

Purchasing/Buying

Orchard Park NY

Base Pay: 19.00 per HOUR

Orchard Park manufacturing company looking for candidates for a Buyer position! Shift: Monday-Friday 8a-4:30pm or 7:00a-3:30pm  Payrate: $18-$...

Orchard Park manufacturing company looking for candidates for a Buyer position!

Shift: Monday-Friday 8a-4:30pm or 7:00a-3:30pm 

Payrate: $18-$20/hr pending experience 

Will be responsible for assisting with purchasing and tactical management of assigned suppliers. Conduct analysis and run reports and support Senior Buyers. 

Duties: 

  • Supports the purchase order process from the initial demand signal to stock. 
  • Supports daily standard work, running reports and support Senior Buyers in pulling drawings. 
  • Assists with purchasing equipment and supplies. 
  • May assist with bids, analyzes quotes and conducts cost/price analysis. 
  • Conduct transactions and day to day support. 
  • Monitor past and current supplier performance ensuring compliance to all regulations, goals and objectives. 
  • Maintain personal knowledge of supplier, government regulations and establish purchasing practices and procedures. 
  • Identifies and implement ideas for performance improvement 

Requirements: 

  • Bachelors degree preferred with 1-2 years of business experience in an office environment. 
  • Strong knowledge of Microsoft office, excel and PowerPoint applications. 
  • Basic technical knowledge of equipment and be familiar with ERP/MRPII or an automated purchasing system. 
  • Requires strong verbal and written communication skills. 

Don't miss out on this great opportunity! Apply today! 

Apply Now More Info

Customs Brokerage

Tonawanda NY

Base Pay: 15-17

Remedy staffing is partnered with a Customs Brokerage company in need of an entry specialists! Shift is 3pm-11pm Pay - 15-17 based on experience Se...

Remedy staffing is partnered with a Customs Brokerage company in need of an entry specialists!

Shift is 3pm-11pm

Pay - 15-17 based on experience

Seek a qualified individual with a minimum of 2 years’ working experience in a customs brokerage environment processing clearances for all modes of transport.  This individual would be responsible for coordinating the importation process to ensure compliance with all rules and regulations of the US Customs Service as well as the company’s internal policies and procedures.

 

Duties & responsibilities

  • Carefully review import documentation for completeness;
  • Follow up with clients to ensure timely delivery of all requisite documents;
  • Process customs entries in a timely manner for shipments arriving for all modes of transportation;
  • Maintain strong knowledge of current US Customs and other government agencies requirements;
  • Coordinate with carriers, customs officers, PGA officials and clients to ensure goods arrive on time;
  • Enter data in computer system timely, efficiently, and accurately.  Knowledge of SmartBorder a plus;
  • Provide first class service to all internal and external customers;
  • Assign correct tariff classifications;
  • Handle phone inquiries.

*** Please apply now for immediate consideration****

Apply Now More Info

Recycling Sorter - 1st shift

STANLEY NY

Base Pay: 13.00 per HOUR

Remedy Staffing is currently hiring for Sorter/Production associates in Stanley/Geneva area. 1st shift, 6am-4:30pm$13.00/hour10 hour days - 4 days/...

Remedy Staffing is currently hiring for Sorter/Production associates in Stanley/Geneva area.

1st shift, 6am-4:30pm
$13.00/hour
10 hour days - 4 days/week - some Fridays a must during the busy season - off on weekends
Sorting recycling material

Requirements:
Work boots required
lifting up to 50 lbs
standing all shift
Must dress for the weather.

Apply today!

Apply Now More Info

Recruiter

Auburn NY

Base Pay: 15.00 per HOUR

Remedy staffing is looking for a qualified, energetic positive candidate to fill an HR Recruiter position in Auburn NY / 8-12 weeks-possibly longer...

Remedy staffing is looking for a qualified, energetic positive candidate to fill an HR Recruiter position in Auburn NY / 8-12 weeks-possibly longer.

Pay rate $15.00/hour
Hours: 9am-5pm Monday - Friday

Experience: 1 ½ - 2 years recruitment experience
-Phone Screening
-Cold Calls
-Resume Searching
-Scheduling

Apply today on remedystaff.com to get your career started!

Apply Now More Info

Payroll assistant

Auburn NY

Base Pay: 16.50 per HOUR

Remedy staffing is looking for qualified candidates for the Auburn area!! Must be able to perform the following duties: Job Duties: Schedule appoin...

Remedy staffing is looking for qualified candidates for the Auburn area!!

Must be able to perform the following duties:

Job Duties:
Schedule appointments, give information to callers for the Payroll Department
· At the direction of the Payroll Director, perform clerical work and minor administrative and business detail
· Read and route incoming mail
· Locate and attach appropriate file to correspondence to be answered by Payroll Team
· Prepare notes, correspondence, and reports; record minutes of staff meetings
· Make copies of correspondence or other printed matter, using copying machine
· Prepare outgoing mail, using postage-metering machine
· Assist Payroll Team with compiling and entering payroll data, and reconcile errors to maintain payroll records using payroll system
· Work with Payroll Team to review wages computed and correct errors to ensure accuracy of payroll
· Prepare periodic reports of earnings, taxes, and deductions
· Maintain records of leave pay and nontaxable wages
· Assist employees with access to payroll and timekeeping software

Pay Rate: $16.50 / hour

Schedule Monday - Friday 9am-5pm

Apply today on remedystaff.com to get your career started!

Apply Now More Info

2nd Shift

PENN YAN NY

Base Pay: 14.20 per HOUR

Penn Yan company looking for a candidate to assemble large bus parts using hand and power tools. 2nd Shift - 2:30p - 11pmMonday - FridayHSD or GED...

Penn Yan company looking for a candidate to assemble large bus parts using hand and power tools.

2nd Shift - 2:30p - 11pm
Monday - Friday
HSD or GED required.
Must be able to follow directions and work at a steady pace.
Must be able to lift and work with other team members
Construction experience a plus

JOB TITLE: BUS ASSEMBLY C, LABOR GRADE 4 Revision: A

JOB SUMMARY:

1. Performs a broad range of assembly and installation tasks.
2. May perform assembly and installation work directly on the bus, or indirectly on the bus.
3. Uses and maintains all of the safety and personal protective devices that are required in the performance of the various tasks that he/she performs.
4. Maintains all tools and equipment that he/she uses in good operating order.
5. Carries out all tasks that are assigned by his/her supervisor for which he/she is qualified.

RESPONSIBILITIES:

1. Refers to the production worker order to verify chassis model and to determine dismantling procedures and bus building requirements for stations 1 and 3.
2. Covers the windshield and dashboard with protective material, and removes windshield wipers, sun visors, floor mats and other specified dashboard components. Sometimes removes the entire dashboard. Catalogues the items by work order number (bus number) for future use, boxes the materials and delivers them to the sub assembly station.
3. Drills holes and installs plus plugs where specified.
4. Relocates the chassis ground wire.
5. Sets a template over the cab roof, marks an outline for the removal of the roof and passenger doorframe. Uses the template to drill specified holes in the cab and doorframe areas, and then uses a chisel and saw to cut out the un-needed roof and doorframe sections. Trims the cut edges, removes tendrils and discards the scrap.
6. Shortens chassis fuel hose in accordance with engineering specifications.
7. Installs heater shut-off valves and caps off hoses.
8. E

Apply Today to get your Career Started!!

Apply Now More Info

Welder

PENN YAN NY

Base Pay: 13.50 per HOUR

Remedy staffing is looking for a welder in the Penn Yan , NY Pay rate: $13.50/hour Hours : 6am - 2:30 pm JOB SUMMARY: 1. In the Fabrication Departm...

Remedy staffing is looking for a welder in the Penn Yan , NY

Pay rate: $13.50/hour
Hours : 6am - 2:30 pm

JOB SUMMARY:

1. In the Fabrication Department the Welder C performs repetitive welding operations to build bus body structural components using stationary assembly fixtures.
2. On the Production Line (East), the Welder C. uses portable fixtures to align and attach (tack weld) various body structures together.
3. Production Line welding operations of the Welder C comprise at least 20% of his/her regular daily workload.
4. Inspects his/her own work to detect any welding defects and re-welds as necessary.
5. Maintains all tools, welding machinery, safety equipment and personal protective devices assigned to him/her in proper operating condition.
6. Follows good housekeeping practices to keep his/her work area clean and hazard free.
7. Carries out all other tasks for which he/she may be qualified as assigned by his/her supervisor.

Responsible for:
Operating and demonstrating the ability to operate Mig welder.
Works as a team to assemble and fabricate bus parts.

Apply today to get your career started!

Apply Now More Info

Large Parts Assembly

PENN YAN NY

Base Pay: 13.50 per HOUR

Penn Yan company looking for a candidate to assemble large bus parts using hand and power tools. 1st Shift - 6am - 2:30pmMonday - FridayHSD or GED...

Penn Yan company looking for a candidate to assemble large bus parts using hand and power tools.

1st Shift - 6am - 2:30pm
Monday - Friday
HSD or GED required.
Must be able to follow directions and work at a steady pace.
Must be able to lift and work with other team members
Construction experience a plus

JOB TITLE: BUS ASSEMBLY C, LABOR GRADE 4 Revision: A

JOB SUMMARY:

1. Performs a broad range of assembly and installation tasks.
2. May perform assembly and installation work directly on the bus, or indirectly on the bus.
3. Uses and maintains all of the safety and personal protective devices that are required in the performance of the various tasks that he/she performs.
4. Maintains all tools and equipment that he/she uses in good operating order.
5. Carries out all tasks that are assigned by his/her supervisor for which he/she is qualified.

RESPONSIBILITIES:

1. Refers to the production worker order to verify chassis model and to determine dismantling procedures and bus building requirements for stations 1 and 3.
2. Covers the windshield and dashboard with protective material, and removes windshield wipers, sun visors, floor mats and other specified dashboard components. Sometimes removes the entire dashboard. Catalogues the items by work order number (bus number) for future use, boxes the materials and delivers them to the sub assembly station.
3. Drills holes and installs plus plugs where specified.
4. Relocates the chassis ground wire.
5. Sets a template over the cab roof, marks an outline for the removal of the roof and passenger doorframe. Uses the template to drill specified holes in the cab and doorframe areas, and then uses a chisel and saw to cut out the un-needed roof and doorframe sections. Trims the cut edges, removes tendrils and discards the scrap.
6. Shortens chassis fuel hose in accordance with engineering specifications.
7. Installs heater shut-off valves and caps off hoses.
8. E

Apply Today to get your Career Started!!

Apply Now More Info

Painter/Undercoater

PENN YAN NY

Base Pay: 13.50 per HOUR

Penn Yan company looking for an undercoating/spray paint candidate. Auto Body Painter JOB SUMMARY1. Under the general supervision of the Paint Depa...

Penn Yan company looking for an undercoating/spray paint candidate.

Auto Body Painter
JOB SUMMARY
1. Under the general supervision of the Paint Department Supervisor, the Painter performs all of the tasks required of the Painter A, plus both of the following painting operations categories:
2. Category One: Paints prepared fabricated bus body surfaces and exterior parts, including Step Frames, Emergency Doors, and Handicap Doors.
3. Category Two: Paints bus bodies and exterior bus body parts with multi-color finish coats as required by the production work order
4. The Painter inspects areas to be painted to ensure that the finish coat will meet specifications, then follows applicable painting procedures to apply the finish coat. The incumbent inspects his/her work for any defects and corrects as needed, and maintains personal safety devices, painting tools and equipment in proper operating order. They use good housekeeping practices to maintain a hazard and dust free working environment. The Painter carries out all additional painting related tasks that may be assigned by his/her supervisor.

RESPONSIBILITIES
1. Follows prescribed paint department procedures prior to making repairs and painting.
2. Washes unpainted bus body or unpainted external parts to be painted using prescribed organic cleaners.
3. Checks entire bus body for any defects in the paint and repairs where needed.
4. Re-checks caulking to ensure completeness. Re-caulks as needed.
5. Washes entire bus body with prescribed organic cleaner, and wipes down windows with dry rags.
6. Cleans the paint booth and all paint spraying equipment and tools used in the painting process with appropriate organic solvent.
7. Maintains all personal protective equipment in proper working order.
8. Performs Paint Repairs as follows:
a. Inspects area to be painted for defects.
b. On unpainted body and unpainted exterior body parts sands or grinds any defect found then

Apply today. Get your career started!

Apply Now More Info

General Labor

WATERLOO NY

Base Pay: 15.00 per HOUR

Seneca Falls/Waterloo area, looking for a construction laborer to assist in finishing up a job. • Construction and General laborer • 1st...

Seneca Falls/Waterloo area, looking for a construction laborer to assist in finishing up a job.


• Construction and General laborer


• 1st shift, $15/hr


• Ability to work in the elements


• Able to follow direction

Apply Today!!

Apply Now More Info

General Labor PT/ per diem

Auburn NY

Base Pay: 15.00 per HOUR

Great new opportunity!! Only 3 positions open! Local Auburn business is in need of a split shift employee to provide safety checks for incoming emp...

Great new opportunity!!

Only 3 positions open!

Local Auburn business is in need of a split shift employee to provide safety checks for incoming employees.

*Hours are 5:00 AM - 8:30 AM and 6:00 PM - 8 PM **Days and hours TBD

*May do mornings only or evenings only - will negotiate schedules upon hire.

*Pay rate is $15.00/hours

*Taking temperatures and evaluating workers as they arrive

*ALL PPE provided

Apply Now - Work Tomorrow!!

Apply Now More Info

Machine Operator

LEROY NY

Base Pay: 13.00 per HOUR

Do you have experience with Machine Operating? If so, APPLY NOW!! Remedy Staffing is looking for qualified candidates for a Mac...

Do you have experience with Machine Operating? If so, APPLY NOW!! Remedy Staffing is looking for qualified candidates for a Machine Operator position at a Manufacturer located in Leroy, NY.

Shift: 3rd shift- Sun-Thurs- 9:30PM-6AM

Pay Rate: $13.00/hour

Job Description:

  • Small machine operation
  • General  assembly
  • Using hot glue guns and/or hot air guns

Apply Now More Info

Production - Nights

PENN YAN NY

Base Pay: 16.75 per HOUR

Excellent Career Opportunity!! Remedy Staffing is seeking production candidates to Operate Machines and to mix/blend any of a wide variety of mater...

Excellent Career Opportunity!!

Remedy Staffing is seeking production candidates to Operate Machines and to mix/blend any of a wide variety of materials.

Shift: 7pm-7am (train on days for up to 6 months)
Wednesday-Saturday (4 nights/wk)

Great new pay rates!
$16.00/hour day shifts
$16.75/hour night shifts

** Competitive pay with pay increases every 6 months to reach $20/hr in 2 years **

Job Duties include:
Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
Compound or process ingredients or dyes, according to formulas.
Read work orders to determine production specifications or information.
Observe production or monitor equipment to ensure safe and efficient operation.
Mix or blend ingredients by starting machines and mixing for specified times.
Dump or pour specified amounts of materials into machinery or equipment.
Collect samples of materials or products for laboratory testing.
Operate or tend machines and to mix or blend any of a wide variety of materials.
Add or mix chemicals or ingredients for processing, using hand tools or other devices.

Requirements:
Great work history
HSD/GED
Steel Toed Boots
Must be able to train on 1st shift for up to 6 months
Must be able to work weekends

Apply Today to get your Career Started!!

Apply Now More Info

Quality Control

PENN YAN NY

Base Pay: 20.00 per HOUR

Remedy staffing is looking for a Quality Control Technician in Penn Yan, NY Must be able to train on days but work nights after training. Pay rate:...

Remedy staffing is looking for a Quality Control Technician in Penn Yan, NY

Must be able to train on days but work nights after training.

Pay rate: $20.00/hour / DOE

Quality Control Technician, - Penn Yan, NY


Essential Responsibilities:
- Remain compliant with Environmental, Health and Safety policies and practices.
- Adheres to company's Core Values and Behaviors
- Performs testing of raw materials in accordance with raw materials specifications.
- Performs in-process and finished goods testing based on ISO9000 control plans.
- Performs equipment calibrations and maintenance to assure top working order.
- Reports in-process test data and monitors for zone rule violations.
- Reports raw material and finished goods data and monitors for compliance.
- Samples incoming raw materials as required.
- Assists in maintenance of raw material and finished product retains
- Supports special testing requests for Engineering, R&D and AT as requested.
- Updates training as required to maintain proficiency in methods.

Required Qualifications:
- Associates Degree in Science related field preferred.
- Minimum of 1- 3 years of experience in working in a chemical laboratory.
- Demonstrated ability to perform chemical testing using similar or relative equipment.
- Ability to follow documented procedures and standards.
- Strong computer skills
- Good project management skills
- Able to work 12 hour shifts with the majority standing or walking.

Competencies:
- Able to multi-task and work under time constraints.
- Able to work independently with minimal supervision
- Must be able to test and report data with minimal errors

Apply today to get your career started!

Apply Now More Info

Machine Operator

Geneva NY

Base Pay: 12.85 per HOUR

Local Geneva company looking for a reliable candidate with good work history to fill an open position in their sanding and molding department. 1st...

Local Geneva company looking for a reliable candidate with good work history to fill an open position in their sanding and molding department.

1st shift, Monday - Friday, $12.85/hour
Hours 7am to 3:30pm

Sanding, painting, pouring molds, etc
Ability to withstand strong smells and work with a respirator
Relevant experience required

Apply Today!

Apply Now More Info

Cleaner

CLIFTON SPRINGS NY

Base Pay: 13.00 per HOUR

Cleaner needed in Clifton Springs, NY and Canandaigua, NY. 1 cleaner for each location, no traveling back and forth needed. Cleaner will sweep and...

Cleaner needed in Clifton Springs, NY and Canandaigua, NY.

1 cleaner for each location, no traveling back and forth needed.

Cleaner will sweep and mop hallways and bathrooms, take out the trash and swipe down surfaces.

Cleaner
Clifton, NY or Canandaigua, NY
Wednesday - Sunday
7:30am - 4pm, $13/hour


Apply Today, start tomorrow!!

Apply Now More Info

Cleaner Canandaigua

Canandaigua NY

Base Pay: 13.00 per HOUR

Cleaner needed in Clifton Springs, NY and Canandaigua, NY. 1 cleaner for each location, no traveling back and forth needed. Cleaner will sweep and...

Cleaner needed in Clifton Springs, NY and Canandaigua, NY.

1 cleaner for each location, no traveling back and forth needed.

Cleaner will sweep and mop hallways and bathrooms, take out the trash and swipe down surfaces.

Cleaner


Clifton, NY or Canandaigua, NY
Wednesday - Sunday
7:30am - 4pm, $13/hour


Apply Today, start tomorrow!!

Apply Now More Info

Warehouse/Service Tech

Dresden NY

Base Pay: 13.50 per HOUR

We are seeing associates for our client in Dresden NY. 2-4 week assignment with possible hire. $13.50/hrM-F (possible weekends/nights)7:30am-4pm (1...

We are seeing associates for our client in Dresden NY. 2-4 week assignment with possible hire.

$13.50/hr
M-F (possible weekends/nights)
7:30am-4pm (1/2 hour lunch)

*Unboxing /w box cutter, stacking, scanning electronics, carry 15-20 lbs.
*Hard hat and safety glasses will be provided
**jeans, sweatshirt, coat. Work boots
* bring lunch

Apply today. Start asap.

Apply Now More Info

Packaging

Newark NY

Base Pay: 13.00 per HOUR

Newark, NY Manufacturer is seeking a Packer to gather materials, pack product and prepare for shipment. Newark, NYPacker, $131st Shift, 7:00-3:30pm...

Newark, NY Manufacturer is seeking a Packer to gather materials, pack product and prepare for shipment.

Newark, NY
Packer, $13
1st Shift, 7:00-3:30pm
Monday - Friday

Apply Now!!

Apply Now More Info

Offline Cutting Operator

GENEVA NY

Base Pay: 16.00 per HOUR

Great opportunity to get into a local leading company in the Geneva area! Looking for Offline Cutting Operator for a rotating/swing 12-hour shift S...

Great opportunity to get into a local leading company in the Geneva area!

Looking for Offline Cutting Operator for a rotating/swing 12-hour shift

SHIFT: Rotating/12 hour Swing Shifts(7am-7pm and then 7pm-7am)
Must be available to weekdays and weekends due to rotating schedule

Pay rate: $16.00/hour

POSITION DETAILS:
• Must maintain safe work environment by consistently wearing proper PPE, performing safe work behaviors and by communicating any and all safety concerns to supervisor/shift manager
• Maintains acceptable productivity levels based on product flow, supervisor feedback and customer needs
• Must be able to measure, cut, and use of various mechanical tools accurately
• Performs other functions as needed

REQUIREMENTS:
• Must be detail-oriented and able to work independently with minimal supervision
• Able to work as a team member and stand alone; being pleasant with others and displaying a good-natured attitude through working in a cooperative manner with fellow employees
• Must have at least 6 months safe working record & reliable attendance history.

Apply today!!

Apply Now More Info

Assembler Naples

Naples NY

Base Pay: 12.50 per HOUR

Production Laborer (Naples, NY) • local, award-winning winery located in Naples have open positions for temp-to-hire laborers on the bottle li...

Production Laborer (Naples, NY) • local, award-winning winery located in Naples have open positions for temp-to-hire laborers on the bottle line.

Immediate placement!

Need ASAP - positions will go fast.


• Position Summary: Monday through Thursday;
• First Shift, 6:30AM-4:30PM; $12.20/hour;
• Overtime is going to be available on Friday’s while we try to get this project completed by June 19th.
• No experience required.
• Job Summary: Employees will work at the end of a production line removing wine bottles. Employees will have to determine if the bottle passes quality inspection. Qualifying bottles will then be placed into boxes and moved by employee.
• Requirements: Must be able to lift up to 25 lbs. Committed to having excellent attendance. Ability to work independently with minimal supervision. Solid work ethic and desire to accomplish tasks in a given period of time. To apply go to remedystaff.com
• No drug test or background check
• HS Diploma is required but is waved for this project

Apply Now More Info

MACHINE OPERATOR

BUFFALO NY

Base Pay: $15.00 Per Hour

Machine Operators/ Buffalo, NY/ 2nd Shift and 3rd Shifts   A  leading Buffalo, NY Manufacturer that has been rated a WNY Best Places...

Machine Operators/ Buffalo, NY/ 2nd Shift and 3rd Shifts

 

A  leading Buffalo, NY Manufacturer that has been rated a WNY Best Places to Work is looking for experienced Machine Operators to operate filling and bagging machines.

 

Shifts: 

2nd:  2:00pm – 10:30pm Monday - Friday

3rd:  10:00pm – 6:30am Sunday - Thursday

 

  

Machine Operator Responsibilities:

  • Detecting equipment malfunctions or misalignments
  • Operating, adjusting, testing and maintaining machines
  • Communicating quality, material and production issues to supervisor
  • Maintaining clean and orderly work area

 

Machine Operator Requirements:

  • Two or more years of experience in a manufacturing setting
  • Mechanical ability
  • Capability of lifting at least 50 pounds
  • Ability to push or pull at least 2500 pounds using a pallet jack
  • Must be able to go up and down ladders
  • Ability reach and bend frequently
  • Strong verbal and written communication skills
  • Attention to detail and accuracy
  • Ability to work on a team

 

Get your foot in the door with this leading Buffalo Manufacturer that has been rated a WNY Best Places to Work!! Great benefits and work environment! Apply now!

 

We welcome active Military Members and Veterans to apply!

Apply Now More Info

Warehouse Associate

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is looking for a Warehouse Worker in the immediate Geneva area! Shifts: AllPay Rate: $14-15.00/hour Job summary:*Supply materials t...

Remedy staffing is looking for a Warehouse Worker in the immediate Geneva area!

Shifts: All
Pay Rate: $14-15.00/hour

Job summary:
*Supply materials to production and Central Weigh to ensure timely and efficient delivery of required materials.
*Supplies material for outside production operations.
*Put away return materials and item to the warehouse;
Compounding; Screening and blow molding.

Education and experience:
*High School Diploma / GED or equivalent
*6 months of realteable manufacturing experience required
*Good math skills and ability to operate forklift truck essential**
*Must be lift truck experienced.

Apply Now More Info

Production

Geneva NY

Base Pay: 15.00 per HOUR

Remedy Staffing is looking for Production Technicians! Great Opportunity for growth and development in a local manufacturing company! Shifts: AllPa...

Remedy Staffing is looking for Production Technicians!

Great Opportunity for growth and development in a local manufacturing company!

Shifts: All
Pay rate:$13.00/hour

Job summary:

*Perform manual assembly functions, packing, placing bottles online, and assemble kits while ensuring accuracy and speed.
*Visually inspect in-process materials for quality and record necessary information, communicate any variances immediately to LC supervisor or Supervisor.
*Able to operate machinery as needed.
*Work with new employees (training)
*Keep area neat and clean
*Perform other job duties as assigned

*Hands on and mechanical know how important!

Requirements:

*High School Diploma / GED or equivalent
*Good communication skills essential

Apply Now More Info

Quality Assurance

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing in looking for QA candidates in the Geneva area. Excellent opportunity for growth and development in a local company! Schedule: All...

Remedy staffing in looking for QA candidates in the Geneva area.

Excellent opportunity for growth and development in a local company!

Schedule: All shifts
Pay rate: $15-17.00/hour DOE

Job summary:
*Assists in compiling date necessary to complete investigation
*Data Review of analytical Quality Lab.
*Audit lab on a routine basis and report daily findings
*Review results transcribed to data tables and reports
*Responsible for achieving & reviewing Data Files for PM/Calibration related to laboratory
*Support manufacturing services through the review and approval of master batch records and completed manufacturing records for review, approval, and release of manufactured product
*Management of equipment in the QA database

Education and experience:
*High School Diploma / GED or equivalent
*Works well independently
*Good verbal and written communication
*Attention to detail
*Detail oriented
*Strong Word and Excel experience
*Prior Data Review experience is a plus

Apply Today to get your Career Started!!

Apply Now More Info

Mixer

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is looking for Mixer technicians in the Geneva area. Excellent opportunity for growth and development in a local company! Job summa...

Remedy staffing is looking for Mixer technicians in the Geneva area.

Excellent opportunity for growth and development in a local company!

Job summary:
Prepare, mix, and adjust manufacture of hair care products in strict accordance with company formulation, quality standards, and production schedules.

Education and experience:

*High School Diploma/GED or equivalent preferred.
*6 plus Months of relatable manufacturing experience required.
*No bending or lifting restrictions.
*Must be able to perform all tasks as described in the job description

 

Apply Now More Info

Manufacturing Worker

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is hiring for a MCT in the Geneva area! Excellent opportunity for growth and development with a local company! Schedule: all shifts...

Remedy staffing is hiring for a MCT in the Geneva area!

Excellent opportunity for growth and development with a local company!

Schedule: all shifts

Pay rate: $20-25.00/hour / DOE

Job summary:
Installation trouble shooting and repair and upgrade of mechanical, electrical, and electronic assemblies systems.

Work includes production, engineering set ups. installations, testing, certifications, and repair.

Qualified candidates will troubleshoot and program PLC-based automation control systems.

Create and/or modify control systems using Programmable Logic Controller (PLC) and Human Machine Interface (HMI) software for existing applications and installations.

Education and Experience:

*Requires an Associate's degree or 5 plus years equivalent technical experience and / or military Technical Training.

*Training and or experience in electrical and electronic fault isolation to include PLC troubleshooting and minor programming.

*A working knowledge of Microsoft Word, Excel, and Powerpoint, Initiative / motivation and communication skills required.

Apply Now More Info

Compounding Sanitizer

Geneva NY

Base Pay: 17.00 per HOUR

Great opportunity with a local company! Potential for advancement! $17-18.00/hour Schedule: All shifts Job duties:Assist department with sanitation...

Great opportunity with a local company!

Potential for advancement!

$17-18.00/hour

Schedule: All shifts

Job duties:
Assist department with sanitation of all potables, totes, drums and miscellaneous containers.

Ensures that all residual chemicals are disposed of properly and in compliance with department and environmental regulations.

Requirements:
High School diploma / GED or equivalent strongly preferred.
Must be lift truck certified

Apply Now More Info

Silk Screen Printer

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is looking for Silk Screen Material Handler in the Geneva area! Direct hire opportunity!! Needs to have a printing background and a...

Remedy staffing is looking for Silk Screen Material Handler in the Geneva area!

Direct hire opportunity!!

Needs to have a printing background and attention to detail.

Supply and loading screening lines

Move materials
Load skid with Various in-process material
Must calculate the piece count to fulfill orders.
Record ISO tracking information for incoming and outgoing materials.
Assisting in changeovers and minor adjustments as directed. * Tend silk Screening lines to assist production technicians.
Perform quality control inspections as required.
Good math skills
Perform quality control inspection required
Operate Silk screening machines

Apply today to get your career started!

remedystaffing.com

Apply Now More Info

Production Line Coordinator

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is searching for Production line coordinator. Responsible for assisting line supervisor in direction of team and production and pro...

Remedy staffing is searching for Production line coordinator.

Responsible for assisting line supervisor in direction of team and production and production line activities to insure proper staffing, training, efficiency, quality, and output.


1 year manufacturing experience.


Good communication skills


Good Math skills


Good production technician and knowledge

 

Apply today to get started in your career!

Apply Now More Info

Quality Control

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is looking for a Quality Control candidate: Assists in compiling data necessary, data review, audit lab on a routine basis, support...

Remedy staffing is looking for a Quality Control candidate:

Assists in compiling data necessary, data review, audit lab on a routine basis, supporting manufacturing services through review and approval of master batch reports.

Conducts Chemical and Physical laboratory tests on raw materials, in-process goods and finished goods, and finished products for compliance to company specifications.

Job duties:
*Testing products
*Maintain log books
*Maintain routine repair of instruments
*Testing product
Chemistry background **

1 year quality control experience

Apply now to get your career started!
remedystaff.com

Apply Now More Info

Expeditor Packaging

Geneva NY

Base Pay: 17.00 per HOUR

Remedy staffing is looking for a candidate for an expeditor packaging position. Job summary:Responsible for maintaining the accuracy and efficient...

Remedy staffing is looking for a candidate for an expeditor packaging position.

Job summary:
Responsible for maintaining the accuracy and efficient flow of components and finished goods into and out of the Packaging Department. Position requires coordination and communication with all functions within the facility the facility to ensure effective operation of the department and timely manufacture of shop orders.

Pay rate $13.00-17.00/hour DOE
Shifts: All available

Education and experience:
* HSD or equivalent education required
*Two to six months experience involving Packaging floor production flow.
*Working knowledge of MAPICS and warehouse inventories.
*Must know how to operate a lift truck / forklift.

Apply today to get your career started!

Apply Now More Info

Blow mold Machine Operator

Geneva NY

Base Pay: 17.00 per HOUR

Remedy Staffing is looking for a machine operator for blow molding. Under supervision of the Blow Molding Manager / shift group leader the mold set...

Remedy Staffing is looking for a machine operator for blow molding.

Under supervision of the Blow Molding Manager / shift group leader the mold setter is responsible for assisting the BLM mechanic to keep the machine running smoothly and efficiently, while gaining mechanical and processing experience necessary to become a Set Up Technician Level 1.

*Machine operator keep machine running efficiently.
*Ability to read blue prints
*Must have good mechanical and math skills
*Must be available for any shift
* Must be able to lift 50lbs consistently

Potential for a direct hire with experience.

Apply today to get your career started!

Apply Now More Info

Janitorial

Geneva NY

Base Pay: 13.60 per HOUR

Remedy staffing is looking for cleaners in the Geneva area. Job duties include but are not limited to: *Sweeping, dusting, vacuuming*Empty and clea...

Remedy staffing is looking for cleaners in the Geneva area.

Job duties include but are not limited to:

*Sweeping, dusting, vacuuming
*Empty and clean waste baskets
*Spot cleaning fingerprints from walls, doors and partitions
*Complete lavatory and bathroom care.
*Floor mopping and waxing, spot mopping, mopping kitchens, landings and bathrooms.

Pay rate: $13.60/hour

Shifts and days vary:

Tuesday-Thursday 11:30pm-8am with Friday and Saturday 9pm-5:30am

Monday-Friday 4:30am-1pm

Thursday-Monday (Thurs, Fri, Mon 4:30am-1pm) (Sat, Sun 7am-3:30pm)

Apply today!!

Get your career started at remedystaff.com

Apply Now More Info

Forklift Driver 3rd shift

Penn Yan NY

Base Pay: 14.50 per HOUR

Local Penn Yan/Dundee company looking for an experienced Forklift Driver to work in their warehouse. 3rd shift - 10pm-6am$14./hour+$0.50 shift diff...

Local Penn Yan/Dundee company looking for an experienced Forklift Driver to work in their warehouse.

3rd shift - 10pm-6am
$14./hour+$0.50 shift differential $14.50/hour
40+ hours/week
Great benefits at time of hire

*Forklift Driver
*Loading and Unloading

Job Requirements:
*Ability to stand for 8+ hours and lift up to 50 lbs.
*Rotating schedule (7 days on/2 days off) - must be able to work weekends
*Steel toed boots (must leave at facility in locker, when not working, to keep sanitary)
*NO smoking on facility grounds, parking lot, etc.

Apply today!

Apply Now More Info